Trending February 2024 # Failed To Lock The File, Module Disk Power On Failed On Vmware # Suggested March 2024 # Top 4 Popular

You are reading the article Failed To Lock The File, Module Disk Power On Failed On Vmware updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Failed To Lock The File, Module Disk Power On Failed On Vmware

Some users have been complaining that VMWare apps have been showing the following error message when trying to open a Virtual Machine.

Failed to start the virtual machine.

In this article, we are going to dig deep into the topic and see what you need to do if you are seeing Module Disk power on Failed on VMWare.

Before fixing the problem, we need to know what is it and what’s causing it. The problem is, some of the VMWare files are blocking your VM. Which is needless to say, won’t let you play the game. But the question is why is it blocking the Virtual Machine. To fathom this, we need to understand the mechanism behind VMWare.

When you open a Virtual Machine, some files are there to control the functioning of your machine. The files with the extension .lck are created as soon as the machine is turned on, and they make sure that multiple VMs can’t read or write to the disk.

Lock files are then instantly deleted as soon as you close the VM. This is done to ensure that it doesn’t interfere with any other service. However, in case of improper shutdown or crashes, these files are left undeleted on your system, which can cause the issue in question.

There are some other reasons and solutions that we will talk about hereinafter. So, without wasting any time let us go to the troubleshooting guide.

Fix Module Disk power on failed on VMWare

If you are seeing “Module Disk Power on Failed” on VMWare, then follow the prescribed solutions to resolve the issue.

Delete Lock folders

Troubleshoot in Clean Boot

Reinstall VMWare

Let us talk about them in detail.

1] Delete Lock folders

As mentioned earlier, the workstation creates a Lock folder which is meant to be deleted as soon as you turn off your Virtual Machine. However, sometimes, you have to delete it manually. We are going to see how to delete Lock or .ilk folders manually. Follow the given steps to do the same.

Power off your VM.

Then delete folders with .lck folders.

Finally, restart your computer and check if the issue persists.

2] Troubleshoot in Clean Boot

There are a lot of apps that can interfere with your Virtual Machine. However, there is no way to just play Inki Pinki Ponki and find the right app. That’s why Windows has a utility that allows you to pick the app that’s causing the problem, that is, Clean Boot. You should perform Clean Boot and find out what’s causing the issue and see what’s causing the problem. Then, remove it, and see if the issue persists.

Clean-boot troubleshooting is designed to isolate a performance problem. To perform clean-boot troubleshooting, you must take a number of actions, and then restart the computer after each action. You may need to manually disable one item after another to try and pinpoint the one that is causing the problem. Once you have identified the offender, you can consider removing or disabling it.

3] Reinstall VMWare

If your VMWare app is corrupted, then apart from abrupt crashes, you can also see these sorts of messages. We can easily reinstall the app to resolve the issue. If you are going to uninstall the app, make sure to create a backup, otherwise, your saved data will be wiped up. Uninstall the app, then redownload, reinstall it and check if the issue persists.

Hopefully, these solutions are able to resolve the issue.

Read: VMware Workstation Pro can’t run on Windows computer.

How do I power a Virtual Machine in VMWare?

What could cause the VM to fail to power back on?

When you start a Virtual Machine but it fails to power on, there could be multiple reasons responsible for that. Some of thee include file corruption, file locks, Guest OS problems, license problems, network problems, user permission issues, etc.

That’s it!

Also check: Fix VMware Workstation Unrecoverable Error (vcpu-0).

You're reading Failed To Lock The File, Module Disk Power On Failed On Vmware

Minecraft Failed To Download File, The File Contents Differ From What Was Expected

When trying to launch a game or download content, Minecraft users are getting Minecraft failed to download file, The file contents differ from what was expected error message. In this post, we are going to talk about this issue and see what you can do to resolve it.

The following is the error message that you may get. However, the content of the error message may differ on your side.

Exists: File

What to do when Minecraft says failed to download file?

If Minecraft is failing to download files at the time of launch, you can try the solutions mentioned to resolve the issue. But before that, it is important to know why this is happening. Following are some reasons you see the error in question.

Minecraft is unable to download a JAVA file. In that case, you can download it manually from the mentioned location.

The downloaded file can not be opened as the default launcher of that file is not set to Java.

Your antivirus or Microsoft Firewall is blocking the file.

Minecraft mods are corrupted.

Let us now go to the troubleshooting guide.

Fix Minecraft failed to download file, The file contents differ from what was expected

If you see Minecraft failed to download the file, The file contents differ from what was expected in Minecraft, try these solutions to resolve the issue.

Download the file from the mentioned URL

Open with JAVA

Allow Minecraft through Firewall

Check Corrupted Minecraft Mods

Reinstall Minecraft Launcher

Let us talk about them in detail.

1] Download the file from the mentioned URL

If you read the error code thoroughly, you will see a URL mentioned there. This signifies that a file is missing and be downloaded from there. So, let us first download the files from mentioned URL. Just copy the URL from the error message or from below (if it’s the same) and paste it in a browser.

When you do that, a file will be downloaded.

Go to the download folder, copy the downloaded file, then, go to ‘Path’ mentioned in your error code. For us, it’s the following.

C:UserslucasAppDataRoaming.minecraftlibrariesnetsfjopt-simplejopt-simple4.5jopt-simple-4.5.jar Exists: File

Delete jopt-simple-4.5.jar and paste the copied path.

Finally, restart your computer and reopen the launcher. Hopefully, this will resolve the issue for you.

2] Open with JAVA

.JAR files must open with Java Runtime Environment. If that is not happening, you need to make sure to configure .JAR files to open with JRE. Follow the prescribed steps to do the same.

Open File Explorer.

Now, go to C:UsersyusufAppDataRoaming

Navigate to .minecraft.

Select Java(TM) Platform SE binary or any other Java or JDK.

If the files are already set to run with Java, then you can skip this step.

Read: Minecraft Multiplayer not working on PC

3] Allow Minecraft through Firewall

Next up, let us allow Minecraft through Firewall or antivirus to make sure that no important Minecraft file is blocked by the security program. If you are using a third-party antivirus, whitelist Minecraft. In case, you are using Microsoft Defender, try the following steps to allow Minecraft through it.

Look for “Windows Security ” from the Start Menu and open the app.

Look for Minecraft and add it through Public and Private networks.

Once Minecraft is added, you can allow it through the Firewall.

Hopefully, this will do the job for you.

4] Check Corrupted Minecraft Mods

If any of the Minecraft mods is corrupted, you will these kinds of issues. You should open File Explorer, go to C:Users%username%AppDataRoaming.minecraft, cut the mods, and paste it elsewhere. Now, open the game and if it is working. If the game is working, one of the mods must be corrupted. First remove the mod that you recently added, if that doesn’t work, try disabling mods one by one until you find the culprit.

5] Reinstall Minecraft Launcher

If nothing worked, then your last resort is to reinstall Minecraft. So, go ahead and uninstall the app from your computer. Then, download the latest version of Minecraft from chúng tôi Hopefully, this will do the job for you.

We hope you can resolve the issue with the solutions mentioned in this article.

Why does my Minecraft say launching the game failed?

Launching the game may fail because of corruption or missing files. The error message “Launching the game files” in Minecraft comes with “Minecraft failed to download the file”. Other reasons include Java’s outdated version, graphics card drivers, antivirus issues, disk space, and corrupt Minecraft installation.

Also Read: Minecraft not installing on Windows PC.

How To Fix “Dump File Creation Failed” Error In Windows

Whenever Windows crashes, it “dumps” all log data into an appropriately named dump file. But what are you supposed to do when even the dump file creation fails? Let’s find out.

Table of Contents

What Is the Purpose of the Windows Dump File?

The problem with diagnosing a blue screen of death (BSOD) is how suddenly things go wrong. Unless you can take an accurate snapshot of the exact state of the operating system at the moment of the crash, you’ll be left shooting in the dark.

And that’s exactly what the dump file does. It is a snapshot of the memory (or a memory dump) at the time of the OS crash, containing a complete or partial log of every process running on it.

For all of its utility, the dump file isn’t a user-friendly source of information. Therefore, it will not be useful unless you are an experienced system administrator or Windows technician.

What Can Cause the “Dump File Creation Failed” Error in Windows?

The dump file is designed to be created even in the case of a catastrophic system crash. As a result, there aren’t many things that can interfere with that process.

Corrupted System Files:

The most probable cause of the “dump file creation failed” error is system file corruption. And we are not talking about a virus or two infecting your system, but rather a widespread data corruption that has reached the essential system files of your computer.

Malfunctioning BIOS:

While rare, an unstable or outdated BIOS version can also interfere with dump file creation. It can be hard to determine when the BIOS is the culprit, so keeping your computer’s firmware updated is recommended to remove this potential factor from consideration.

Cleanup Apps:

Third-party cleanup apps boasting of improving Windows performance are popular with many users. Unfortunately, some of these apps get a bit overzealous with their cleanup and can also wipe out log files and dump data. While you can no longer regain the lost dump files, removing such apps can prevent the issue in the future.

Hardware Faults:

There is always the possibility that an underlying hardware issue is causing issues. RAM problems, a failing hard drive – many malfunctioning components can prevent a dump file from being written to the disk.

Fix 1: Uninstall Cleanup Applications

The easiest fix to the “dump file creation failed” error is to uninstall any third-party cleaning apps that might be deleting your PC’s log files.

Removing any app on Windows is a simple case of running its uninstaller. If you cannot locate it (or don’t remember its name), you can always check the installed Apps from Settings.



to view and uninstall applications on Windows 11 or Windows 10. You can find its gear icon in the Start menu.

Switch to the


tab on the left and select

Installed apps


As you might expect, this lists all installed applications on your computer. They are arranged alphabetically by default, so you can scroll down to the entries starting with C and check if any cleaning app exists. You can also search for a specific app if you remember a part of its name.

The dedicated uninstaller for the app will remove the application. Follow along with the instructions, and the app will be uninstalled from your PC, hopefully solving your issue as well.

Fix 2: Repair System Files With DISM and SFC

If a cleaning app wasn’t the root of your problem, you should start suspecting corrupted system files. And the good news is that you can fix this issue with two command prompt utilities.

The System File Checker (SFC) is a handy command that verifies the integrity of Windows files by comparing them against a system image, replacing any corrupted data with fresh copies. This means you can rescue a corrupted OS without having to reinstall Windows.

When SFC and DISM are used in tandem, there are very few Windows errors that you cannot fix. Including the “dump file creation failed” error.

To repair your PC’s system files using CMD utilities, open the

Command Prompt


Run as Administrator

. You can find the app by searching with “cmd” in the Start Menu in Windows 11.

We will begin with a DISM scan to ensure that the system image is not compromised. Enter the following command:

Dism /Online /Cleanup-Image /RestoreHealth

This triggers a full scan of the local image, using a downloaded image from Microsoft as a base. DISM will automatically fix any deviations found during this scan, restoring the system image to a pristine condition.

Now we can run an SFC scan without worrying about issues with the system image itself. Just enter sfc /scannow to repair your OS of any data corruption.

SFC will verify every system file, replacing any missing entries or corrupted data. By the time the scan has finished, your Windows installation will be repaired to a fully functional state.

Fix 3: Update BIOS

If repairing your OS and removing all cleanup apps didn’t fix your issue, the BIOS is the next stop. Updating the BIOS isn’t too difficult these days, thanks to installation packages compiled by motherboard manufacturers that flash the chip automatically.

Updating your BIOS is always risky, as losing power during the process can brick your computer completely. So only try this out with a guaranteed power backup and an understanding of the risks involved.

There will be no exact steps for this section, as the process of flashing the BIOS can vary from motherboard to motherboard. Some systems will have a method of updating the BIOS from within Windows, while others require preparing a USB stick with the necessary files. You can find more information about BIOS updates in our dedicated article.

Fix 4: Check the RAM for Errors

After ruling out all possible software issues, the only thing left is to check the hardware. This can mean the RAM or the HDD.

Checking the RAM for errors is easy. There are multiple methods for testing the memory in Windows, from the built-in memory diagnostic tool to third-party utilities like MemTest86.

Some of these testers work by checking the memory without the OS entirely booting into Windows, while others test the RAM with Windows still running. Both methods should be used to comprehensively verify memory health.

For this guide, we will demonstrate RAM testing using PassMark’s MemTest86, the popular memory-checking tool. You can download the free version of the software from the official website.

MemTest86 is a preboot memory tester, so it needs to be run from a USB drive. The application setup will help you format and prepare a bootable flash drive for this test.

Plug the prepared USB into your computer and reboot it. If your boot options are set correctly, you will boot from the flash drive, opening the memory testing tool. Configure the options to your liking (not that it is needed) and start testing your RAM.

The UI is pretty barebones, but clearly communicates the progress as MemTest86 scans your memory sticks for issues. As it runs multiple tests, it can take a while to complete.

When all the tests are complete, you will be presented with a summary of the results. Don’t worry about writing it all down – you can save a detailed report in the next step.

MemTest86 can generate an HTML report containing its findings in a more user-friendly format. Hit


to confirm.

After this, your PC will boot up normally. You will find the compiled HTML report on the USB drive you prepared, with a general pass/fail verdict and a detailed breakdown of the RAM’s performance.

Fix 5: Scan the Hard Disk for Issues

The hard disk is a more common point of failure than the RAM, especially if you are still using old-school Hard Disk Drives (HDD) with spinning platters and magnetic coatings. And a malfunctioning storage can often fail at recording the dump file.

In a relatively modern hard disk, it is possible to get an accurate look at its health simply by looking at its S.M.A.R.T. status. For older disks, we have to use other methods.

You can get a basic read of the S.M.A.R.T. status by just using the command prompt. This will only work if your HDD supports the technology. Still, open the Command Prompt to try it out.

Type the following command and press


: wmic diskdrive get model,status

The results are…underwhelming. All you will get is an


, or a

Pred Fail

if the drive is about to die. You will need to use a third-party tool to get a more detailed report of its health.

CrystalDisk Info is a good free option. Just download and run the app to get a complete analysis of your hard drive’s condition.

What Is the Best Way to Fix the “Dump File Creation Failed” Error in Windows?

As the most common reason for seeing a “dump file creation failed” message is corrupted system files, repairing your OS with DISM and SFC should be the first thing you try. These commands can restore your Windows installation without losing any data.

Overactive disk cleaning programs are another potential factor, so it is a good idea to comb through your installed apps and remove any such software.

And while you can update your BIOS easily, there is no troubleshooting your hard drive or RAM through software alone. All you can do is check their health and ensure everything is working correctly.

Theport Sharing Service Failed To Start On Windows 11/10

One of the numerous Windows Services that run on the Windows 11/10 OS is the NET.TCP Port Sharing service. This particular service allows multiple users to share the TCP ports over the chúng tôi protocol in a more secure way. In some cases, this service may fail to start even though you have set it up to automatically start on your Windows 11/10 device. This post identifies the potential cause, as well as provide the most suitable solutions to the error message The NetTcpPortSharing service failed to start on Windows 11/10.

When you encounter this issue, you’ll receive the following similar error message in the Event Viewer:

The service did not respond to the start or control request in a timely fashion.

The following are the potential culprits to this error:

Glitched or Disabled chúng tôi Port Sharing Service.

Inconsistent or corrupted TCP / IP data.

.NET Framework 3.5 is disabled.

Recent critical system change – mostly Windows update

System file corruption.

The chúng tôi Port Sharing service failed to start

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Disable IPv6

Set the chúng tôi Port Sharing Service to automatic startup

Re-enable the .NET Framework 3.5 Dependency

Reset Winsock

Perform System Restore

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Disable IPV6

Disabling IPv6 on your Windows 10 device could fix the chúng tôi Port Sharing Service Failed To Start issue.

2] Set the chúng tôi Port Sharing Service to automatic startup

You may encounter this error due to a Windows 10 glitch, that will force the chúng tôi Port Sharing Service to be stuck in a state where it can neither be opened nor be closed. In this case, you need to restart the service automatically. Here’s how:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type chúng tôi and hit Enter to open Services.

In the Services window, scroll and locate the NET.TCP Port Sharing Service.

Make sure that the option under the Startup type menu in the service’s properties window is set to Automatic. Confirm any dialog boxes which may appear when changing the startup type.

Exit Services console.

Restart computer.

If the issue persists, try the next solution.

3] Re-enable the .NET Framework 3.5 Dependency

This solution requires you to enable the .NET Framework 3.5 dependency from the Windows Features applet. Here’s how:

Invoke the Run dialog box.

In the Run dialog box, type chúng tôi and hit Enter to open the Programs and Features window.

Now, check both the Windows Communication Foundation HTTP Activation and Windows Communication Foundation Non-HTTP Activation box.

Note: In case you find both options are already enabled, then uncheck to disable them temporarily, restart your PC. Then once your PC boots, check both options to enable them again.

Restart computer.

4] Reset Winsock

Since this error might be network adapter-related, resetting Winsock will help you solve the errors pertaining to the Transmission Control Protocol and Internet Protocols.

5] Perform System Restore

A System Restore is basically a snapshot of the Windows System files and other installed application files on your system at a specific point in time. Performing a system restore helps the files to be restored to a previous state when the OS was working fine without issue.

If System Restore fails to fix the issue, you can try Reset This PC, or Cloud Reset, or In-place Upgrade Repair to resolve the issue.

Hope this helps!

Failed To Load The Jni Shared Library

When you try to open or start Eclipse or other software like Spring Tool Suite (STS), KNIME, Dbeaver, etc on your Windows 11 or Windows 10 computer, you may get the error stating Failed to load the JNI shared library. This post provides applicable fixes to the error that can help affected PC users resolve the issue on their system.

What is a shared library in Java?

In Java, a shared library is files used by multiple applications. Each shared library consists of a symbolic name, a Java classpath, and a native path for loading Java Native Interface (JNI) libraries. Typically, shared libraries can be used to reduce the number of duplicate library files on your system.

Failed to load the JNI shared library “C:/JDK/bin/client/jvm.dll”`

PC users that encountered this error reported the problem often appears as soon as you run the software after been installed on the system — the software usually just closes afterward. The error indicates that the Java Native Interface (JNI) library required by the software cannot be found or loaded. This error is known to be triggered often by any of the following common reasons.

Mismatching architecture (bitness) versions of the problematic software and Java Runtime.

Java is not installed on the system, or the installation is corrupted.

Both the 32-bit and 64-bit versions of Java or multiple versions of the problematic software are installed.

The software doesn’t detect or point to the wrong Java installation folder.

The JNI library is missing or corrupt.

System configuration issues.

Fix Failed to load the JNI shared library

If you get Failed to load the JNI shared library when you try to open software like Dbeaver, KNIME, Eclipse, Spring Tool Suite et al on your Windows 11/10 computer, then the solutions we have drawn up and presented below can help you easily fix the error.

Start the software with the -clean option

Edit the software .ini file

Make sure the software and Java versions match

Remove the Java Path Variable

Reinstall the software.

Let’s see how these fixes apply. Before you proceed, depending on the software throwing the error on your system, make sure you’re running the latest version/build of the software then see if the issue is resolved. Likewise, try updating your system libraries (this includes .Net Framework and Visual C++ redistributable) and update drivers.

1] Start the software with the -clean option

When you launch the software normally and it throws the Failed to load the JNI shared library error on your Windows 11/10 computer, you can try starting the software with the -clean option, which will reset the software configuration. To do this, open a command prompt and navigate to the software installation directory,

2] Edit the software .ini file

This fix requires you to edit the problematic software .ini file to make sure the software is pointing to the correct Java installation and the software is configured to use the correct Java version and the Java executable is in the system path. To perform this task, follow these steps:

Open File Explorer.

On the C: drive, navigate to the installation directory of the Java Development Kit.

Now, press the Alt+D key combo to change the breadcrumb navigation and highlight the address bar.

Now, make sure you navigate to the top of the file and paste the lines below. Substitute the pathto placeholder with the file path you copied from the File Explorer address bar.

-vm C:pathto64bitjavabinjavaw.exe

Save the file and exit.

Now, relaunch the program and see if the error reappears. If so, continue with the next fix.

3] Make sure the software and Java versions match

For this fix, if you are using a 64-bit version of the problematic software, you should also make sure you install the 64-bit version of Java Runtime. Likewise, you need to do the same if using the 32-bit version. So, if that’s the case, then you can uninstall Java and then download/install the correct Java bitness version to match the software bitness on your system.

4] Remove the Java Path Variable

In the case where you have both the 32-bit and the 64-bit versions of Java installed on your computer, the software throwing the error may be unable to determine the appropriate Java version to use. For example, if a 64-bit version of the software tries to use the 32-bit version of Java, the error is triggered. In this case, to resolve the issue, instead of uninstalling one version of Java, you can simply delete its Path variable by following these steps:

Press the Windows key + R to invoke the Run dialog.

In the Run dialog box, type chúng tôi and hit Enter to open System Properties.

Under the User variables section, you will see a list of all user variables.

Locate a path for the Java folder (that doesn’t match the version of the problematic software installed), select it, and choose Delete from the left-side menu.

Try reopening the program and checking to see if it will run properly now. If not, proceed with the next fix.

5] Reinstall the software

You can uninstall the software, and then download the latest version of the software and install it on your Windows 11/10 computer. This action will most likely resolve the issue.

I hope this post helps you!

Read next: A JNI error has occurred in Minecraft

What is the purpose of JNI?

With the JNI library, programmers can write native methods to handle situations when an application cannot be written entirely in the Java programming language. For example, this can be used when the standard Java class library does not support the platform-specific features or program library.

Critical Service Failed Bsod On Windows 10: Fix & Causes

Critical Service Failed BSoD on Windows 10: Fix & Causes Everything you need to get rid of this dreaded BSoD issue









The Critical service failed issue in Windows 10 can appear when there are in

compatibility problems with a newly installed hardware or driver.

You can try to use a dedicated tool to solve common BSoD errors and restore the performance of your computer.

Performing a System Restore is another tested solution that should work for you.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Blue Screen of Deaths are somewhat serious issues, and one of those errors is Critical Service Failed. This can cause many problems, as it can prevent you from booting into your PC normally.

In this guide, we will show you the surefire ways to fix this issue and help restore normalcy on your PC.

What is the cause of critical service failed?

Below are some of the factors that can cause critical service failed error:

Outdated drivers: One of the major causes of this issue is an outdated or incompatible driver. You can fix this quickly by performing a system restore.

Corrupt system files: A faulty system file is another potential cause of this issue. This is especially true if your startup files are broken. The solution is to repair and restore these corrupt system files.

After discussing the potential causes of this issue, below are some of its examples:

Critical System Failure Windows 10 – BSoD caused by Critical System Failure is especially common in Windows 10.

Critical Service Failed loop – This error usually doesn’t appear just once, as you might get stuck in the loop of BSoDs caused by the Critical System Failure.

Windows 10 Critical Process died on boot – It’s also common for this problem to appear right after you boot your computer, but it can also appear later.

Critical_service_failed Windows Server 2012 – Windows Server 2012 is, along with Windows 10, a Windows OS that has the most problems with this error.

HP Critical Service failed – HP’s laptops are known to have this issue sometimes. More than laptops from other manufacturers.

How can I fix the Critical Service Failure BSoD error? 1. Perform a System Restore from Safe Mode

System Restore is a recovery feature in the Windows operating system that allows you to restore your PC to an earlier state. 

So, if you are facing a Critical Service Failed error after updating your PC or drivers, you can use this tool to restore normalcy.

2. Repair Windows 10 using Windows Install Media

The Windows Install Media also includes repair options. This can help you fix many issues, including the Critical Service Failed Blue Screen of Death issue.

3. Use a dedicated tool

Expert tip:

4. Refresh your Windows 10

Another excellent solution to the Critical Service Failed issue is to reset your PC to default. Note that refreshing Windows 10 will remove any third-party software you have installed, but it will save your files and settings.

So before doing this, it’s not a bad idea to create a backup just in case.

5. Perform a clean reinstallation

If the solutions above fail to fix this BSoD issue, you might need to reinstall your Windows 10. While this is not a desirable solution, it might be the only option for salvaging your PC.

To know everything you need to do this, check our detailed guide to perform a reinstall of Windows 10.

With this, we can conclude this guide on how to fix the Critical Service Failed error. Hopefully, you won’t have to get to the last solution to this issue.

If you are facing another BSoD in Critical Process Died on Windows 10, check our detailed guide to fix this issue.

Was this page helpful?


Update the detailed information about Failed To Lock The File, Module Disk Power On Failed On Vmware on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!