You are reading the article Fix: Windows 8.1 Update Install Failed: 80070020, 80073712 And 0X800F081F updated in February 2024 on the website Eastwest.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix: Windows 8.1 Update Install Failed: 80070020, 80073712 And 0X800F081FFix: Windows 8.1 Update Install Failed: 80070020, 80073712 and 0x800f081f
Luckily for me, I haven’t had any problems installing the latest Windows 8.1 update and right now I’m enjoying all that’s new in Windows 8.1 Update. However, many readers have sent in their complaints and I’ve also seen numerous posts on the Microsoft community forums of Windows 8.1 users complaining of getting various error codes when their Windows 8.1 Update installation process has failed – 80070020, 80073712, 0x800f081f and others. Problems are more often encountered by those who have chosen to install the updates manually on their own, than those who have waited silently to get it via Windows Update.
Read Also: Enhance the Windows 8 Clipboard Manager with These Tools
Therefore, my immediate suggestion would be to install the Windows 8.1 Update, if you haven’t done it yet, via the Windows Update option. It might sound dumb, but if you have experienced problems by using this method, then try downloading the KB files manually. Of course, to do that, you will need to revert from Windows 8.1 Update to Windows 8.1, and here’s how to uninstall it. Here’s what one affected user is saying about these issues:
I’ve been trying to get the Windows 8.1 Update 1 to install for a couple hours now. I installed a series of files using windows update earlier in the day. Later I tried installing the update file (KB2919355) that popped up in the Windows Update window. The downloading process look over 45 minutes for a 800 MB file even thought I have an internet connection over 20 MB/s. After that it spent 20 minutes installing the update until it failed giving an error code of 80070020. From that I restarted the computer to see if I could try another stab at it, nothing changed or improved.
Now I looked in the Windows update history to see if the other required updates like KB2919442, KB2932046, KB2937592 and KB2938439 were installed and they aren’t in the update history. I thought they were installed already for KB2919355 to be installed. Are all of these update files included in the KF2919355 update that pops up in the windows update? Also, my update history can is only up to date in the control panel and doesn’t show any updates installed in the modern PC settings app. Did windows update fail to properly install updates required before trying to install later updates? What can and can’t I install right now?
Besides the fact that the installation process of Windows 8.1 Update failed, some users have reported that their Modern Windows 8 apps are not working, and even built-in ones like Mail-Calendar-Messaging-People; they crash and the user gets the 0x80070002 error. Also, if you feel like the download or the install takes an awful lot of time, even some few good hours, than just be patient. It’s been reported by others, as well.
Open command prompt – in the search box type “command”
Type the following commands: dism.exe /online /cleanup-image chúng tôi /online /cleanup-image /restorehealth and after that press enter
If this doesn’t work, here’s another solution that has apparently worked for some:
Run command primot as admin
Type the following command and then press enter:
Run the following command: DISM /online /cleanup-image /restorehealth
Install KB2919355 and restart
An easier fix would be to try the Windows Update troubleshooter, just in case you haven’t done it already. Also, it could happen that you are missing some Windows Update components or they might be broken or corrupt, so follow this tutorial from Microsoft on how you can fix it. If you’re still having troubles, then you can also try and perform a Clean Boot install of the Windows 8.1 Update, just to make sure that there aren’t any software conflicts at all. Another funny fix that has been reported by the community is to create a new Microsoft user account and perform the install by using it.
Read Also: How To Uninstall Windows 8.1 Update 1
Was this page helpful?
You're reading Fix: Windows 8.1 Update Install Failed: 80070020, 80073712 And 0X800F081F
Critical Service Failed BSoD on Windows 10: Fix & Causes Everything you need to get rid of this dreaded BSoD issue
The Critical service failed issue in Windows 10 can appear when there are in
compatibility problems with a newly installed hardware or driver.
You can try to use a dedicated tool to solve common BSoD errors and restore the performance of your computer.
Performing a System Restore is another tested solution that should work for you.
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
readers this month.
Blue Screen of Deaths are somewhat serious issues, and one of those errors is Critical Service Failed. This can cause many problems, as it can prevent you from booting into your PC normally.
In this guide, we will show you the surefire ways to fix this issue and help restore normalcy on your PC.What is the cause of critical service failed?
Below are some of the factors that can cause critical service failed error:
Outdated drivers: One of the major causes of this issue is an outdated or incompatible driver. You can fix this quickly by performing a system restore.
Corrupt system files: A faulty system file is another potential cause of this issue. This is especially true if your startup files are broken. The solution is to repair and restore these corrupt system files.
After discussing the potential causes of this issue, below are some of its examples:
Critical System Failure Windows 10 – BSoD caused by Critical System Failure is especially common in Windows 10.
Critical Service Failed loop – This error usually doesn’t appear just once, as you might get stuck in the loop of BSoDs caused by the Critical System Failure.
Windows 10 Critical Process died on boot – It’s also common for this problem to appear right after you boot your computer, but it can also appear later.
Critical_service_failed Windows Server 2012 – Windows Server 2012 is, along with Windows 10, a Windows OS that has the most problems with this error.
HP Critical Service failed – HP’s laptops are known to have this issue sometimes. More than laptops from other manufacturers.How can I fix the Critical Service Failure BSoD error? 1. Perform a System Restore from Safe Mode
System Restore is a recovery feature in the Windows operating system that allows you to restore your PC to an earlier state.
So, if you are facing a Critical Service Failed error after updating your PC or drivers, you can use this tool to restore normalcy.2. Repair Windows 10 using Windows Install Media
The Windows Install Media also includes repair options. This can help you fix many issues, including the Critical Service Failed Blue Screen of Death issue.3. Use a dedicated tool
Expert tip:4. Refresh your Windows 10
Another excellent solution to the Critical Service Failed issue is to reset your PC to default. Note that refreshing Windows 10 will remove any third-party software you have installed, but it will save your files and settings.
So before doing this, it’s not a bad idea to create a backup just in case.5. Perform a clean reinstallation
If the solutions above fail to fix this BSoD issue, you might need to reinstall your Windows 10. While this is not a desirable solution, it might be the only option for salvaging your PC.
To know everything you need to do this, check our detailed guide to perform a reinstall of Windows 10.
With this, we can conclude this guide on how to fix the Critical Service Failed error. Hopefully, you won’t have to get to the last solution to this issue.
If you are facing another BSoD in Critical Process Died on Windows 10, check our detailed guide to fix this issue.
Was this page helpful?
FULL FIX: HAL INITIALIZATION FAILED error in Windows 10/11
If a certain driver is outdated or not compatible with your OS, you’ll encounter a HAL_INITIALIZATION_FAILED Windows 10 error.
The HAL INSTALLATION FAILED error can also occur due to malfunctioning of unproperly connected hardware components.
One of the best solutions to fix this problem is to use dedicated third-party repair software.
The HAL INITIALIZATION FAILED stop code can also be fixed by updating the drivers.
There are all sorts of errors on Windows 10, but Blue Screen of Death errors are probably the most problematic.
These errors will constantly restart your computer in order to prevent damage, and that can be rather tiresome.
Since these errors are so serious, today we’re going to show you how to fix HAL INITIALIZATION FAILED error. We have to mention that our solutions also cover the VMware HAL INITIALIZATION FAILED issue.How can I fix the HAL INITIALIZATION FAILED BSoD error? 1. Use third-party repair software
BSoD errors are not to be treated lightly as they can disturb all your workflow and can consume time and effort to fix.
However, there is an easier way to deal with them and especially with the HAL INITIALIZATION FAILED error. That is by using specialized software that can fix such errors automatically and quickly repair the system.2. Check if your drivers and Windows 10 are up to date
Many BSoD errors are caused by hardware or software incompatibility, and in order to fix this issue, it’s crucial to update Windows 10 frequently.
Microsoft is bringing new features through Windows Update, but in addition to new features, there are also many fixes designed to fix any hardware and software incompatibilities that you might have.
To avoid any BSoD errors, and to keep your computer safe and stable, make sure to update Windows 10 as frequently as you can.
Downloading Windows 10 updates is important, but it’s also crucial that you update your drivers.
Drivers allow Windows 10 to better utilize your hardware, and if the certain driver is outdated or not compatible with Windows 10, you’ll encounter a HAL INITIALIZATION FAILED BSoD error.
To update your drivers, all you have to do is to visit your hardware manufacturer’s website, locate the device you wish to update, and download the latest drivers for it.
After downloading the latest drivers, the BSoD error should be resolved.
Few users reported that this BSoD error was caused by their graphic card driver, therefore be sure to update your graphic card driver first and then move to other drivers.
To be sure that the error is fixed, try to update as many drivers as you can.
Update drivers automatically
Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.3. Run the BSoD troubleshooter
The next thing we’re going to try is running the built-in troubleshooter featured in Windows 10. This troubleshooter can help with all sorts of issues, including the BSOD errors.
So naturally, it could be helpful with resolving the HAL INITIALIZATION FAILED error, as well.4. Run the SFC scan
Go to Search, type cmd, and open the Command Prompt as administrator.
Enter the following line and press Enter: sfc/scannow
Wait for the scan to complete (it will take a while).
The tool will automatically resolve the problem, if possible.
Close Command Prompt and restart your computer.
Another troubleshooter that could be helpful here is the SFC scan. This is a command-line tool that scans your system for potential flaws, and resolves them, if possible.
So, it could also resolve the HAL INITIALIZATION FAILED error.5. Run DISM
5.1 Run DISM the standard way
Open the Command Prompt as shown in the previous step.
Paste the following command and press Enter:
DISM /Online /Cleanup-Image /RestoreHealth
Wait until the scan is finished.
Restart your computer and try updating again.
5.2 Run DISN using a Windows installation media
Insert your Windows installation media.
Start Command Prompt as shown in the previous solution.
In the command line, type the following commands and press Enter after each:
dism /online /cleanup-image /scanhealth
dism /online /cleanup-image /restorehealth
Now, type the following command and press Enter:
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
Make sure to change an X value with the letter of the mounted drive with Windows 10 installation.
After the procedure is finished, restart your computer.
And the third troubleshooting tool we’re going to use while trying to resolve the HAL INITIALIZATION FAILED error is DISM.
Deployment Image and Servicing (DISM), as its name says, re-deploys the system image, so it’s possible it will also resolve some potential issues along the way.
We’ll walk you through both standard and the procedure that utilizes the installation media above.6. Check the hard drive
6. Restart your computer and check if the issue is resolved.
A broken hard drive is alarming. And the first warning messages come in the form of BSoD issues. So, go and check the current state of your hard drive.
To do that, you should run the chkdsk command. This command will scan your partitions, and apply solutions, if possible.7. Check for problematic software
Often these types of problems can be caused by problematic software. And in order to fix HAL INITIALIZATION FAILED error, you’ll need to find the program that is causing this problem and disable/uninstall it.
Most commonly these types of errors are caused by your antivirus software, so be sure to uninstall your antivirus software.
If you’re concerned about your safety, you should know that Windows Defender will turn on automatically after you uninstall your antivirus program, so your PC won’t be without any protection.
It’s worth mentioning that almost any antivirus program can cause this error, so be sure to remove any third-party antivirus that you have installed.
In addition, in order to completely remove a certain antivirus, including registry entries and all files, it’s recommended to use a dedicated PC cleaning tool to analyze and remove junk files.
Many antivirus companies offer uninstaller tools for their software, so be sure to download them and use them.
However, sometimes there are files that are left behind after the installation and that can lead to other problems with your system and take up precious space.
The best way of wiping up an app is by using specialized software and CCleaner is perfect for this job. Not only that it will uninstall the app but it will delete any records from the registry and any other leftover files.
⇒ Get CCleaner8. Set UsePlatformClock to true
8.1 Use Command Prompt
Users reported that performing the aforementioned steps fixed the BSoD error while waking up from Sleep Mode, so if you’re having a similar problem, be sure to try the steps above.
If you cannot access Windows 10 due to this error, you can try performing these steps from Safe Mode. To enter Safe Mode, follow the next steps.
8.2 Enter Safe Mode9. Update your BIOS
Few users reporting that updating BIOS fixed the HAL INITIALIZATION FAILED error.
As for the necessary files, you can download the latest BIOS from your motherboard manufacturer’s website.10. Reset Windows 10
If the problem persists even after Windows 10 reset, it means that the issue is most likely caused by a faulty or incompatible hardware.
If the problem is caused by a certain software, you can fix it by performing Windows 10 reset.
Resetting Windows 10 will delete all files from your C drive, so be sure to create a backup.11. Check your hardware
HAL INITIALIZATION FAILED can be often caused by incompatible hardware, therefore if you installed any new hardware recently, be sure to remove it or replace it and see if your PC works better without it.
If you didn’t install any new hardware, you might want to check if your hardware is working properly.
A most common cause for BSoD errors is your RAM, so be sure to test your RAM modules one by one.
In addition, you can also use tools such as MemTest86+ to check your RAM. If your RAM is not the problem, check your hard drive, graphics card, and motherboard.
Almost any hardware component can cause this error, so you’ll need to perform a thorough inspection.
HAL INITIALIZATION FAILED BSoD error can be problematic, but as you can see, this error can be relatively easy to fix if you use one of our solutions.
Was this page helpful?
Start a conversation
Whenever Windows crashes, it “dumps” all log data into an appropriately named dump file. But what are you supposed to do when even the dump file creation fails? Let’s find out.
Table of ContentsWhat Is the Purpose of the Windows Dump File?
The problem with diagnosing a blue screen of death (BSOD) is how suddenly things go wrong. Unless you can take an accurate snapshot of the exact state of the operating system at the moment of the crash, you’ll be left shooting in the dark.
And that’s exactly what the dump file does. It is a snapshot of the memory (or a memory dump) at the time of the OS crash, containing a complete or partial log of every process running on it.
For all of its utility, the dump file isn’t a user-friendly source of information. Therefore, it will not be useful unless you are an experienced system administrator or Windows technician.What Can Cause the “Dump File Creation Failed” Error in Windows?
The dump file is designed to be created even in the case of a catastrophic system crash. As a result, there aren’t many things that can interfere with that process.
Corrupted System Files:
The most probable cause of the “dump file creation failed” error is system file corruption. And we are not talking about a virus or two infecting your system, but rather a widespread data corruption that has reached the essential system files of your computer.
While rare, an unstable or outdated BIOS version can also interfere with dump file creation. It can be hard to determine when the BIOS is the culprit, so keeping your computer’s firmware updated is recommended to remove this potential factor from consideration.
Third-party cleanup apps boasting of improving Windows performance are popular with many users. Unfortunately, some of these apps get a bit overzealous with their cleanup and can also wipe out log files and dump data. While you can no longer regain the lost dump files, removing such apps can prevent the issue in the future.
There is always the possibility that an underlying hardware issue is causing issues. RAM problems, a failing hard drive – many malfunctioning components can prevent a dump file from being written to the disk.Fix 1: Uninstall Cleanup Applications
The easiest fix to the “dump file creation failed” error is to uninstall any third-party cleaning apps that might be deleting your PC’s log files.
Removing any app on Windows is a simple case of running its uninstaller. If you cannot locate it (or don’t remember its name), you can always check the installed Apps from Settings.
to view and uninstall applications on Windows 11 or Windows 10. You can find its gear icon in the Start menu.
Switch to the
tab on the left and select
As you might expect, this lists all installed applications on your computer. They are arranged alphabetically by default, so you can scroll down to the entries starting with C and check if any cleaning app exists. You can also search for a specific app if you remember a part of its name.
The dedicated uninstaller for the app will remove the application. Follow along with the instructions, and the app will be uninstalled from your PC, hopefully solving your issue as well.Fix 2: Repair System Files With DISM and SFC
If a cleaning app wasn’t the root of your problem, you should start suspecting corrupted system files. And the good news is that you can fix this issue with two command prompt utilities.
The System File Checker (SFC) is a handy command that verifies the integrity of Windows files by comparing them against a system image, replacing any corrupted data with fresh copies. This means you can rescue a corrupted OS without having to reinstall Windows.
When SFC and DISM are used in tandem, there are very few Windows errors that you cannot fix. Including the “dump file creation failed” error.
To repair your PC’s system files using CMD utilities, open the
Run as Administrator
. You can find the app by searching with “cmd” in the Start Menu in Windows 11.
We will begin with a DISM scan to ensure that the system image is not compromised. Enter the following command:
Dism /Online /Cleanup-Image /RestoreHealth
This triggers a full scan of the local image, using a downloaded image from Microsoft as a base. DISM will automatically fix any deviations found during this scan, restoring the system image to a pristine condition.
Now we can run an SFC scan without worrying about issues with the system image itself. Just enter sfc /scannow to repair your OS of any data corruption.
SFC will verify every system file, replacing any missing entries or corrupted data. By the time the scan has finished, your Windows installation will be repaired to a fully functional state.Fix 3: Update BIOS
If repairing your OS and removing all cleanup apps didn’t fix your issue, the BIOS is the next stop. Updating the BIOS isn’t too difficult these days, thanks to installation packages compiled by motherboard manufacturers that flash the chip automatically.
Updating your BIOS is always risky, as losing power during the process can brick your computer completely. So only try this out with a guaranteed power backup and an understanding of the risks involved.
There will be no exact steps for this section, as the process of flashing the BIOS can vary from motherboard to motherboard. Some systems will have a method of updating the BIOS from within Windows, while others require preparing a USB stick with the necessary files. You can find more information about BIOS updates in our dedicated article.Fix 4: Check the RAM for Errors
After ruling out all possible software issues, the only thing left is to check the hardware. This can mean the RAM or the HDD.
Checking the RAM for errors is easy. There are multiple methods for testing the memory in Windows, from the built-in memory diagnostic tool to third-party utilities like MemTest86.
Some of these testers work by checking the memory without the OS entirely booting into Windows, while others test the RAM with Windows still running. Both methods should be used to comprehensively verify memory health.
For this guide, we will demonstrate RAM testing using PassMark’s MemTest86, the popular memory-checking tool. You can download the free version of the software from the official website.
MemTest86 is a preboot memory tester, so it needs to be run from a USB drive. The application setup will help you format and prepare a bootable flash drive for this test.
Plug the prepared USB into your computer and reboot it. If your boot options are set correctly, you will boot from the flash drive, opening the memory testing tool. Configure the options to your liking (not that it is needed) and start testing your RAM.
The UI is pretty barebones, but clearly communicates the progress as MemTest86 scans your memory sticks for issues. As it runs multiple tests, it can take a while to complete.
When all the tests are complete, you will be presented with a summary of the results. Don’t worry about writing it all down – you can save a detailed report in the next step.
MemTest86 can generate an HTML report containing its findings in a more user-friendly format. Hit
After this, your PC will boot up normally. You will find the compiled HTML report on the USB drive you prepared, with a general pass/fail verdict and a detailed breakdown of the RAM’s performance.Fix 5: Scan the Hard Disk for Issues
The hard disk is a more common point of failure than the RAM, especially if you are still using old-school Hard Disk Drives (HDD) with spinning platters and magnetic coatings. And a malfunctioning storage can often fail at recording the dump file.
In a relatively modern hard disk, it is possible to get an accurate look at its health simply by looking at its S.M.A.R.T. status. For older disks, we have to use other methods.
You can get a basic read of the S.M.A.R.T. status by just using the command prompt. This will only work if your HDD supports the technology. Still, open the Command Prompt to try it out.
Type the following command and press
: wmic diskdrive get model,status
The results are…underwhelming. All you will get is an
, or a
if the drive is about to die. You will need to use a third-party tool to get a more detailed report of its health.
CrystalDisk Info is a good free option. Just download and run the app to get a complete analysis of your hard drive’s condition.What Is the Best Way to Fix the “Dump File Creation Failed” Error in Windows?
As the most common reason for seeing a “dump file creation failed” message is corrupted system files, repairing your OS with DISM and SFC should be the first thing you try. These commands can restore your Windows installation without losing any data.
Overactive disk cleaning programs are another potential factor, so it is a good idea to comb through your installed apps and remove any such software.
And while you can update your BIOS easily, there is no troubleshooting your hard drive or RAM through software alone. All you can do is check their health and ensure everything is working correctly.
How to install Windows 10 October Update from an ISO file
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
readers this month.
Microsoft has announced the launch of the Windows 10 October 2023 Update which is now available for download for all. The update is also crucial in that it comes with a whole host of bug fixes and enhancements. It also does away with several features which have either been replaced with new improved versions or are being worked upon for a future release sometime soon.
However, irrespective of whether there are new exciting features accompanying any new update being launched, installing the latest updates is always recommended as it contains all the fixes and protections against all of the newest and emerging threats. Mentioned below are the steps to install the update on your PC using an ISO file.
Head over to the official Microsoft page that is offering the Windows 10 download. With the update now officially launched, the link Windows 10 October 2023 Update now available is there right at the top. However, we would prefer downloading the same via an ISO file as this would allow for a clean installation of Windows 10 with the October update instead of upgrading the current system.
The Windows 10 Setup window will show up which will perform a few necessary verifications before the Microsoft Software License Of course you have to Accept the terms to proceed.
You will next be asked What do you want to do? Among the options provided include Upgrade this PC now and Create installation media (USB flash drive, DVD, or ISO file) for another PC.
You will be led to a window where you will be asked to select the Language, Edition and Architecture The recommended values relevant for your PC should already be filled in though you can always enter your own choices. To do that, uncheck the Use the recommended options for this PC and enter your preferred values. Make sure you enter the right values so as not to end up downloading the wrong version.
Here, you will have some waiting to do until the ISO file gets downloaded. The waiting time varies depending on your system and internet speed.
Once the ISO file has been downloaded you can transfer it to a USB flash drive, or for that matter, any storage medium.
Follow on-screen instructions to complete the installation process. Once that is done, your PC should be upgraded to include the latest Windows 10 October 2023 update.
That’s it. Let us know if you managed to install Windows 10 v1809 on your PC. How has your upgrade experience been so far?
RELATED STORIES TO CHECK OUT:
Was this page helpful?
Start a conversation
If you are a Windows 10 user who is trying to update to the latest version but repeatedly keep seeing error 80244019. This article will guide you through the process of fixing the issue, following some simple, standard Windows procedures.
How to Unsend Messages in Facebook Messenger. (Delete Sent Facebook Messages)
Windows 10 has a massive collection of bugs and error messages it can and will throw at you when given the chance. Sady Windows Updates are still one of the most error-prone components of the operating system, barely an update goes by without an error message of some kind to accompany it.
The latest error code to rear its head is error 80244019 and although it isn’t all that common, it can be hard to get rid of. Thankfully when you know the cause, fixing it is pretty easy, so follow along as the rest of this article takes you through a range of different troubleshooting steps.
Related: How to Remove the Date From the Windows 10 Taskbar Clock. (Show Only Time)How Do You Fix Windows 10 Update Error 80244019?
Windows will now spend some time checking your system for anything that may be causing error 80244019. If the tool finds any problems, it will try to fix them automatically. If the problem/s can’t be fixed, you’ll be notified and need to continue with the steps shown below.Restart Update Related Services to Fix Windows 10 Update Error 80244019.
To begin open Command Prompt as Admin, then copy and paste the following commands into the Command window.net stop wuauserv net stop bits
Once each of the above commands has finished running, all Windows Update Services will be stopped, allowing you to restart them and reset the process. To do this, enter the following commands.net start wuauserv net start bits
When these commands finish running, close Command Prompt and try to update Windows. Hopefully, error 80244019 will now be gone. If it isn’t, you can try to manually update Windows 10 using Microsoft’s update catalogue.Fix Update Error 80244019 By Manually Updating Windows 10.
If none of the above has helped, you can manually force an update using Microsoft’s official update catalogue here. Simply take note of the version KB code for the failed update that is causing error 80244019 and find it using the catalogue. Once you find it, match it to your version of Windows 10, then download and install it. I’ve had quite a few random update error messages from Windows 10 over the years and a forced manual update using the Microsoft update catalogue hasn’t failed me yet.
Update the detailed information about Fix: Windows 8.1 Update Install Failed: 80070020, 80073712 And 0X800F081F on the Eastwest.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!