Trending February 2024 # Fixblue Screen Error On Windows 11/10 # Suggested March 2024 # Top 10 Popular

You are reading the article Fixblue Screen Error On Windows 11/10 updated in February 2024 on the website Eastwest.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fixblue Screen Error On Windows 11/10

The original chúng tôi is an important part of Windows and rarely causes problems. The file chúng tôi is the Windows Network Data Usage Monitoring Driver file and is located in the C:WindowsSystem32drivers folder and the process is known as Windows Network Data Usage Monitoring Driver. If you’re encountering the chúng tôi Blue Screen error on your Windows 11/10 device, you can try the solutions provided in this post.

You may encounter this issue after a successful upgrade to the latest version of Windows 11/10.

Fix chúng tôi BSOD error

If you’re faced with this SYSTEM_SERVICE_EXCEPTION error, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Run the Blue Screen Online Troubleshooter

Update network card drivers

Rename and replace chúng tôi file

Rollback to previous Windows 11/10 version

Switch internet connection mode

Reset Windows 11/10

Clean install Windows 11/10

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run the Blue Screen Online Troubleshooter

In some cases, the Blue Screen Online Troubleshooter from Microsoft will resolve BSOD errors.

2] Update network card drivers

The chúng tôi is known as Windows Network Data Usage Monitoring Driver. So, you might be encountering this error because of outdated or corrupted network card drivers. In this case, you can either update your drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also automatically update your drivers or you can download the latest version of the driver from the network card manufacturer’s website.

3] Rename and replace chúng tôi file

Do the following:

Press Windows key + E to open File Explorer.

Navigate to the folder path below:

C:WindowsSystem32drivers

Name the chúng tôi file as Ndu.sys1.

Note: If you cannot change the name of the file, make sure you logged in with an administrator account or simply change the permissions you have on this specific file to the administrator.

Next, open again the C: partition you have Windows 10 installed.

Search in the C: partition for the chúng tôi folder. This folder contains the old Windows 10 version you upgraded from.

Locate and open the System32 folder you have in the chúng tôi folder.

Search in the drivers’ folder for the chúng tôi file.

Now paste it in the drivers’ folder of the current upgraded Windows 10 install.

Exit File Explorer.

Reboot your Windows 10 computer.

On boot, check to see if the BSOD error persists. If so, try the next solution.

4] Rollback to previous Windows version

This solution requires you to roll back to a previous version of Windows 11/10.

5] Switch internet connection mode

This solution requires you to switch internet connection mode. So, if you are using a wired (ethernet) connection mode to access the internet on your Windows 10 computer, you can switch to wireless connection mode or vice-versa, and see if the error persists.

6] Reset Windows 11/10

This solution requires you to reset Windows and see if that helps.

7] Clean install Windows 11/10

At this point, if none of the above solutions worked to resolve the BSOD error, it’s most likely due to some kind of system corruption that cannot be resolved conventionally. In this case, you can back up your files to an external USB drive; if you can’t boot to the desktop, use a Linux Live USB and then clean install Windows.

Hope this helps!

You're reading Fixblue Screen Error On Windows 11/10

Fixblue Screen On Windows 11/10

In this post, we show you how to fix the mtkwl6ex.sys Blue Screen on Windows 11/10 computers. The chúng tôi is a MediaTek WiFi device driver, and since you are seeing this BSOD, we can make an assumption that you have a MediaTek WiFi driver that is giving some issues.

There are various BSOD caused by chúng tôi such as the System Service Exception, System Thread Exception Not Handled, DPC WATCHDOG VIOLATION, etc. All of them are primarily caused due to the failure of the chúng tôi MediaTek WiFi driver. The symptoms may vary – but the cause is the same!

Fix chúng tôi Blue Screen on Windows 11/10

If you want to fix chúng tôi Blue Screen on Windows 11/10, then check out the following solutions:

Update MediaTek WiFi Device Driver

Rollback Network Driver

Reinstall the WiFi Driver

Fix Corrupted files

Use System Restore

Let us talk about them in detail.

1] Update MediaTek WiFi Device Driver

You can see the BSOD because of a compatibility issue or a bug, either way, an update is required. So, first of all, we need to update MediaTek WiFi Device Driver. There are various methods to do the same. You can Install Optional Updates as it will update the drivers.

Or, go to the manufacturer’s website and download the latest version of the driver. Since the issue is seen on Lenovo Laptops running MediaTek MT7921 driver, they have released an update of the driver that can be downloaded from chúng tôi You can also go to chúng tôi and see if they have an update.

Read: How to find which Driver is causing the Blue Screen

2] Rollback Network Driver

If there is no MediaTek update available, and if you recently updated your drivers, then it is better to roll back to the previous version when everything was working fine. Once, the developer releases an update, you can install it and resolve the issue. Follow the given steps to do the same.

Open Device Manager.

Expand Network adapters.

If the button is greyed out, move to the next solution.

3] Reinstall the WiFi Driver

Apart from compatibility issues, you may also see BSOD because of your MediaTek driver if it is corrupted. To resolve it, we need to uninstall and then reinstall the driver.

Before moving forward, it is better to download a copy of the driver from the website, you can check Device Manager to know the exact name of your driver. However, Windows usually detect and install the required driver if it goes missing.

Hopefully, this will do the job for you.

4] Fix corrupted files

You may also see BSOD because of corrupted system files. However, the good news is, these can be repaired. We are going to use some commands to do the same. So, open Command Prompt as an administrator by searching it out of the Start Menu. Then execute the following System File Check command.

sfc /scannow

This will take some time to execute. So, wait for the completion and then restart your computer. If that doesn’t work, we are going to execute the DISM command. So, type the following text in the command-line interpreter and hit Enter.

DISM /Online /Cleanup-Image /RestoreHealth

Hopefully, this will do the job for you.

5] Use System Restore Point

If you have created a System Restore Point then this is the right time to deploy it. We are going to restore your system to the point when the BSOD was absent. Follow the given steps to do the same.

Search out “System Restore Point” from the Start Menu.

Select a restore point and follow the on-screen instructions to complete the task.

It should do the job for you.

How do I fix inaccessible boot device error in Windows 11?

The Inaccessible_Boot_Device Stop error occurs on Windows computers due to many causes, like corrupted system files, corruption in Boot Partition, etc. To fix this error, you can use some fixes, like editing the boot options, removing the recently added hardware, performing the System Restore, performing a clean installation of Windows, etc.

Does RAM cause BSOD?

Yes, RAMs can cause BSOD, but they are not the only reason. BSOD is a result of your system failure, that be your Hard Disk, RAM, Driver, etc. So, your system can crash because of a faulty RAM stick. If you have two sticks, and one of them has malfunctioned, you can see the error.

Also Read:

Fixblue Screen In Windows 11/10

A Blue Screen of Death error could be the worst headache for Windows users. However, if we target the cause of the BSoD error and troubleshoot accordingly, it can be easy to fix. Many users have reported the Blue Screen of Death error mentioning the chúng tôi file as the cause. If you encounter the BthA2DP.sys BSoD error on your Windows system, please read through this article for the resolutions.

What is the chúng tôi file?

The chúng tôi is a system file associated with Bluetooth drivers. The full form of chúng tôi is Bluetooth A2DP driver. If this file is missing or corrupt, it will impact the function of the Bluetooth device and associated system hardware. Furthermore, since it returns a stop code, a Blue Screen of Death error can be caused. The chúng tôi BSoD error can be represented on the system with the stop codes DRIVER_IRQL_NOT_LESS_OR_EQUAL or System Thread Exception Not Handled.

Fix chúng tôi Blue Screen in Windows 11/10

Try the following solutions sequentially to resolve the problem:

Add the file to Exceptions in AV

Run the SFC Scan and DISM Scan

Run Windows Updates and install any Bluetooth Optional Update that may be offered

Run Bluetooth Troubleshooter

Update Bluetooth drivers on your system

1] Add the file to Exceptions in AV

Some users have reported that their Kaspersky antivirus deletes or suppresses the chúng tôi file. Thus, if you use it, we suggest adding this file to its Exceptions list. You may see this file in the Quarantine section. Alternatively, you could use another free antivirus software product instead.

2] Run the SFC Scan and DISM Scan

The chúng tôi file is a system file. If it is missing, it can be replaced using an SFC Scan. The SFC Scan checks for missing and corrupt files in the computer and replaces them if possible. If the SFC Scan doesn’t work, you can also try the DISM Scan which repairs the system image. Remember to reboot your computer after performing these scans.

3] Run Windows Updates and install any Bluetooth Optional Update that may be offered

If the associated Bluetooth drivers are present but obsolete, then the BSoD might occur. To resolve this problem, you can update the Bluetooth drivers on your computer. This can be done by installing Optional updates on Windows. The procedure for installing Optional updates on Windows has been explained further.

Select all the Optional updates and install them.

Reboot your system.

4] Run Bluetooth Troubleshooter

Since the chúng tôi file is associated with the Bluetooth drivers, running the Bluetooth troubleshooter could be helpful in solving the problem. The procedure to run the Bluetooth troubleshooter is as follows:

In the Settings menu, go to the System tab on the list on the left-hand side.

Reboot your system once the troubleshooter completes its job.

5] Update Bluetooth drivers on your computer

In case the Bluetooth drivers on your system are obsolete, consider updating them to the latest version. This will be very helpful in resolving the chúng tôi BSoD error on your Windows system permanently. You can download the Bluetooth drivers from your system manufacturer’s website. Alternatively, you can also use AMD AutoDetect or Intel Driver and Support Assistant depending on the processor you have for your system.

Hope it helps!

Fix Driver_Pnp_Watchdog Blue Screen Error On Windows 11/10

If you’re encountering DRIVER_PNP_WATCHDOG Blue Screen error on your device after upgrading to Windows 11 or the latest version/build of Windows 10, then this post is intended to help you with the solutions you can try to fix this issue.

The DRIVER_PNP_WATCHDOG bug check has a value of 0x000001D5. This indicates that a driver has failed to complete a PnP operation within a specific time.

The most likely culprits to this error include;

Wrong SATA Controller Settings in BIOS.

Malware Infections.

Anti-Virus and Firewall Issues.

Volume Shadow Service.

Faulty System Services.

Corrupted System Files and Drives.

RAM Issues.

Faulty/Outdated Device Drivers.

Conflicting Update.

Problematic Windows Update.

Outdated OS.

Corrupt Windows Installation.

DRIVER_PNP_WATCHDOG Blue Screen error

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the DRIVER PNP WATCHDOG Blue Screen of Death (BSOD) error on your Windows 11/10 PC.

Run the Blue Screen Online Troubleshooter

Change SATA Controller Settings in BIOS

Run SFC scan

Run CHKDSK

Update drivers

Check Volume Shadow Copy service

Run Automatic Repair

Perform System Restore

Reset PC

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run the Blue Screen Online Troubleshooter

First thing you can try when troubleshooting BSOD errors on Windows 11/10 computer is to run the Blue Screen Online Troubleshooter from Microsoft. The wizard is designed to help beginners & novice users troubleshoot their Blue Screens and fix the stop errors like this DRIVER_PNP_WATCHDOG automatically.

2] Change SATA Controller Settings in BIOS

When the HDD controller mode is set to AHCI or RAID and the system lacks appropriate drivers, the system might encounter the error in Windows 11/10. In this case to fix the problem, the disk controller must be interchanged to SATA or ATA or IDE mode. To do this, you have to access the BIOS and make the required changes by following proper guidelines in the instruction manual of the motherboard supplied at the time of buying it or checking on the internet.

3] Run SFC scan

This solution requires you run SFC scan and see if that helps to resolve the issue at hand. If not, try the next solution.

4] Run CHKDSK

As already indicated, this BSOD issue possibly occurs due to system error or having bad sectors on the hard drive. In this case, you can run CHKDSK and see if that helps. Otherwise, proceed with the next solution.

5] Update drivers

If this BSOD error started to appear after you have connected a new device to the system, then you need to check the device compatibility with the version/build of Windows 11/10 that you’re currently running. If the device is compatible, then you need to download the latest drivers from the official website of the device manufacturer and install them. However, if the latest drivers are installed, you can roll back the driver or download and install an earlier version of the drivers.

6] Check Volume Shadow Copy service

The Volume Shadow Copy Service in the Windows OS manages and implements Volume Shadow Copies used for backup and other purposes. If this service isn’t running properly, it can cause the issue at hand. This solution requires you to check the Volume Shadow Copy service and make sure the service is started and running, also ensure the Startup type is set to Automatic.

7] Run Automatic Repair

Automatic Repair helps fix problems that keep Windows from loading, including Blue Screen of Death errors. This solution requires you to run Automatic Repair on your Windows 11/10 device.

You can also try an automatic repair using the Windows 11/10 installation media. Here’s how:

Contact the PC manufacturer (or refer to the manual that came with the PC) to know on how to change the boot order of the computer. You will have to change the boot device to a USB drive.

On any working PC, create (if you don’t have one handy) a Windows 11/10 installation USB drive. You can create the Windows installation media on a Linux machine or Mac computer if that’s what you have access to.

Boot the faulty PC using the Windows installation media.

The Windows Setup dialog box will appear.

Set the Time and currency format, Keyboard or input method and the language to install.

Follow the on-screen instructions to complete the Automatic Repair.

When done, eject the installation media and reboot and see if the issue is resolved. If not, try the next solution.

8] Perform System Restore

In case your Windows 11/10 device is unable to boot after the error occurred, this solution requires you to perform System Restore when your PC won’t boot to the desktop.

9] Reset PC

As a last resort, you can reset your Windows 11/10 PC to fix the BSOD error.

How do I fix the Blue Screen code on Windows?

For PC users that may encounter BSOD errors on their Windows device, the basic fixes for Stop Code errors include; Restart your computer. Run SFC and CHKDSK which are Windows system utilities you can use to fix a corrupt file system. If you Microsoft has already recognized a bug, they might have already rolled out an update. In that case, it is recommended to update your PC.

What does Preparing automatic repair mean?

Automatic Repair is a Windows built-in feature designed to fix boot-related issues when a startup problem arises automatically. Sometimes, when it fails to work, you may encounter the Automatic Repair loop error, making your computer reboot repeatedly. You can go through the aforementioned guide even if you get this error on your Windows 11/10 PC.

Related post: DPC WATCHDOG VIOLATION Blue Screen in Windows.

Fix 0Xc0000094 Error On Windows 11/10 Computer

If you are getting error code 0xc0000094 on your Windows 11/10 computer, this guide will help you fix the issue. Although it appears when you accidentally delete essential Registry values, some third-party programs can do that as well while being uninstalled. Either way, you can go through these solutions to get rid of this problem on your Windows 11 and Windows 10 PC.

The main reason why you are getting this error is that you have deleted some of the important Registry values from the Registry Editor. Either you have deleted them, or some malware, adware, or software deleted those values from your computer. If you have recently uninstalled software and removed the leftovers from the C drive and Registry Editor, you might get the same issue.

Fix 0xc0000094 error on Windows computer

To fix 0xc0000094 error on Windows 11/10 computer, follow these steps:

Restore Registry files

Use System Restore point

Change date and time

Run SFC scan

Run anti-adware scan

To learn more about these steps, continue reading.

1] Restore Registry files

Before uninstalling the software, if you have created a backup of your Registry files, you are in safe hands. The first working solution to resolve this issue is to restore Registry files. For your information, it is pretty straightforward and easy to execute. To restore Registry files, do the following:

Now, check if the problem has been resolved or not.

If you have not created a Registry backup, then this suggestion wont be of any use to you.

2] Use System Restore point

Most third-party software uninstallers create a System Restore point before uninstalling a software. They do that for a similar purpose, like this one. Even if you have created a System Restore point earlier, it is the perfect time to use it on your PC to get rid of the aforementioned error. You can follow the following steps to use the System Restore point on Windows 11/10 PC.

3] Change date and time

If none of the two solutions worked for you, you could try changing the date and time on your computer. At times, using an incorrect date and time might cause this issue. Therefore, follow this guide to change the date and time. For your information, you need to use Windows Settings to get it done.

4] Run SFC scan

A corrupt file can also cause this issue on your PC. The System File Checker scans for corrupt files on your computer recognizes them, and fix the issue within moments. Although it takes a few moments, it does the job pretty well. Therefore, you can follow this guide to run System File Checker on Windows 11/10 PC. In simple words, you need to open an elevated Command Prompt window and enter this command: sfc /scannow.

5] Run anti-adware scan

Hope these solutions worked for you.

How do I fix Windows error code?

There is no definite solution to fix Windows error code unless or until you specify the error message or error code. However, in most cases, you can use these 5 universal fixes for Windows problems – like using the in-built Troubleshooters, run SFC scans, use System Restore point, use the CHKDSK utility, etc. Nonetheless, it is essential to recognize the error message first.

What is error 0xc0000005?

To fix error 0xc0000005 on Windows 11/10, you need to run the System File Checker, uninstaller recently installed Windows Updates, check your RAM, etc. On the other hand, you may need to turn off the antivirus program, recreate the Boot Records, etc. If nothing helps, you can opt for the Clean Boot State and troubleshoot the issue in that state.

Black Screen Appears During Screen Share In Discord On Windows 11/10

There are known cases whereby some PC gamers that use Discord, while trying to share screen they are faced with a black screen. This post is intended to help affected users with the most suitable solutions to resolve the issue of Black Screen appears during Screen Share in Discord on Windows 11 or Windows 10 computer.

Why is my screen black when I share it on Discord?

If while you’re streaming on Discord and your screen is black when you share it on Discord, it’s most likely due to an outdated or corrupted graphics or video adapter driver. This can easily be resolved by making sure you have the right driver installed on your computer to eliminate the chances of getting a black screen. See more detailed solutions below.

The most likely culprits to this issue include-

Running Discord in Full-Screen Mode.

Outdated graphics card drivers.

Incorrect permissions.

Using the latest technologies option in Discord.

Outdated Discord app version.

Black Screen appears during Screen Share in Discord

If you’re faced with this Black Screen appears during Screen Share in Discord issue on your Windows gaming rig, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Run Discord with admin privilege

Update Discord

Update graphics driver

Clear Discord cache folder

Disable Discord latest Capture technology

Disable Hardware Acceleration in Discord

Enable Reduced Motion feature in Discord

Uninstall and re-install Discord

Let’s take a look at the description of the process involved concerning each of the listed solutions.

Before you proceed restart your PC and see if that helps. Also, check for updates and install any available bits on your Windows device and see if the issue is resolved.

And, know that Discord doesn’t allow the full-screen sharing (a potential cause to the black screen issue) feature. So, whatever application you are running, make sure you’re running the app in windowed mode on your computer.

1] Run Discord with admin privilege

This solution requires you to run Discord app with admin privilege and see if the Black Screen appears during Screen Share in Discord issue is resolved. If not, try the next solution.

2] Update Discord

To update Discord on your Windows PC, do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type the environment variable below and hit Enter.

%localappdata%

After the update completes successfully, relaunch Discord app and try the screen-share again. If the issue is unresolved, try the next solution.

3] Update the graphics driver

This solution requires you to either update your graphics card drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the graphics adapter hardware manufacturer’s website.

4] Clear Discord cache folder

To clear Discord cache folder on your Windows PC, do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type the environment variable below and hit Enter.

%appdata%

At the location, locate (you may need to show hidden files/folders) the Discord folder.

Select the Discord folder, and tap DELETE on your keyboard.

Next, run %localappdata% and delete the Discord folder at that location as well.

Close and relaunch the Discord app.

See if the issue at hand is resolved; otherwise, try the next solution.

5] Disable Discord latest Capture technology

To disable Discord latest Capture technology, do the following:

Open Discord app on your Windows computer.

Toggle the button for the option Use our latest technology to capture your screen to Off.

Exit Discord settings.

Now see if you can screen-share without the black screen; else you can proceed with the next solution.

6] Disable Hardware Acceleration in Discord

To disable Hardware Acceleration in Discord, do the following:

Open Discord app on your Windows computer.

Toggle the button for the option Hardware Acceleration to Off.

Discord app will close and re-launch on your computer. Check if the issue is resolved. If not, move down to the next solution.

7] Enable Reduced Motion feature in Discord

To enable Reduced Motion feature in Discord, do the following:

Open Discord app on your Windows computer.

Now, clear the Sync with computer settings checkbox.

Next, toggle the button for the option Enable Reduced Motion to ON.

Finally, press the Ctrl + R key combo to restart the Discord app on your computer.

If the issue at hand persists, try the next solution.

8] Uninstall and re-install Discord

This solution requires you to uninstall the Discord app (preferably, use a third-party software uninstaller), clear Discord AppData folder contents, reboot PC, and then download and reinstall the latest version of the Discord app on your Windows 11/10 PC.

Hope this helps!

How do I fix a black screen when screen sharing on Zoom?

In this scenario whereby you are presented with a black screen when screen-sharing on Zoom is most likely caused by your Windows 11/10 computer’s Graphics Processing Unit (GPU) automatically switching graphics cards. To fix the issue, if you are using a Windows computer with a dedicated NVIDIA GPU, use the NVIDIA Control Panel within the Windows Control Panel.

Update the detailed information about Fixblue Screen Error On Windows 11/10 on the Eastwest.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!