Trending February 2024 # Philz Touch Recovery For Verizon Galaxy Note 3 Sm # Suggested March 2024 # Top 7 Popular

You are reading the article Philz Touch Recovery For Verizon Galaxy Note 3 Sm updated in February 2024 on the website Eastwest.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Philz Touch Recovery For Verizon Galaxy Note 3 Sm

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: PhilZ Touch RECOVERY ON VERIZON GALAXY NOTE 3 SM-N900V

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900V!

Do not use the procedures discussed here on any other Galaxy Note 3 (including the Galaxy Note 3 variant at Sprint and T-Mobile and other International variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash PhilZ Touch Recovery on your Verizon Galaxy Note 3. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Note 3 on your computer.

► SAMSUNG GALAXY NOTE 3 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the Odin zip file and PhilZ Touch Tar file given below. Transfer both Odin and recovery tar file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE   PhilZ Touch TOUCH TAR FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing PhilZ Touch recovery, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Move the PhilZ Touch file, philz_touch_6.08.9-hltevzw.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

philz_touch_6.08.9-hltevzw.tar.md5

Disconnect the Galaxy Note 3 from PC if it is connected.

Boot your Verizon Galaxy Note 3 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Note 3 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the recovery file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

PhilZ Touch Recovery has installed successfully on your Note 3. To boot your Galaxy Note 3 into Recovery Mode:

Power off your phone first and wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together: Volume Up + Power + Home.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Note 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

You're reading Philz Touch Recovery For Verizon Galaxy Note 3 Sm

Sprint Galaxy Note 4 Twrp Recovery (Sm

TWRP recovery is a custom recovery by the folks over at chúng tôi With a custom recovery you can do numerous things on your Galaxy Note 4 like flashing a custom ROM or installing MODs/tweaks to alter behavior of certain things on the stock firmware of your Galaxy Note 4.

A custom recovery like TWRP is a very powerful tool for managing the system on your phone. You could factory reset your Note 4 from TWRP recovery or clean system cache, even wipe the entire system partition on your device. So be verycautious when you’re using a custom recovery, because if used without care you may lose important data on your device.

With TWRP recovery available for Galaxy Note 4, there will be a rapid influx of custom ROMs and MODs/tweaks for your device very soon over at the XDA forums. We’ll be sure to cover the best of them as and when they appear.

Grab the TWRP recovery image in .tar package from the download links below and flash the recovery on your Note 4 using Odin. If you’re new to Android or you’ve never done stuff like this, then we’ve a complete step-by-step installation guide for you to flash the TWRP recovery on your Note 4.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  SPRINT GALAXY NOTE 4 TWRP RECOVERY INSTALLATION GUIDE

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Please know that this page is meant only for Sprint Galaxy Note 4. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash recovery on your Sprint Galaxy Note 4.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG GALAXY NOTE 4 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the files given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

  TWRP RECOVERY TAR FILE   ODIN ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the TWRP Recovery, which might delete internal sd card too, your files will remain safe on PC.

Extract

/Unzip the Odin

zip file

, Latest Odin_3.10.0.zip on your computer (using 7-zip free software, preferably) to get the following files:

Odin3 v3.10.0.exe

Odin3.ini

Odin3 v3.10.0.exe

Odin3.ini

openrecovery-twrp-xx.xx-trltespr.img.tar

Disconnect the Galaxy Note 4 from PC if it is connected.

Boot your Galaxy Note 4 into Download Mode:

Power off your phone first. Wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Note 4 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

Load the recovery file in .tar form into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps. (Step 7 and Step 8)

When you get PASS! message, your device will restart automatically. You can then disconnect your phone from PC.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

NOTE: It may happen that your phone doesn’t automatically boot into recovery. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:

Pull out the battery and re-insert it.

Boot your Galaxy Note 4 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Philz Touch Advanced Cwm Recovery For Htc One S With One Click Installer!

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: PHILZ CWM ADVANCED TOUCH RECOVERY ON HTC ONE S

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be Z520e!

Do not use the procedures discussed here on any other variant of HTC One S (Including the Z560e and T-Mobile variant) or any other device of HTC or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash PhilZ Touch Recovery on your HTC One S. If you are not sure, follow the link below for a definitive guide for installing driver for your HTC One S on your computer.

► HOW TO INSTALL DRIVERS ON HTC ANDROID PHONES

 STEP 3: UNLOCK BOOTLOADER

 Skip this step if your device is already bootloader unlocked.

Use must first unlock the bootloader on your HTC One S before proceeding with the guide below. Without unlocking the bootloader you won’t be able to use fastboot commands to flash the recovery on your device.

For unlocking bootloader of your HTC One S, follow the link below. The procedure given below is for HTC One but will also work on HTC One S.

► HTC ONE BOOTLOADER UNLOCK GUIDE

   STEP 4: INSTALLATION INSTRUCTIONS   DOWNLOADS   ONE CLICK PHILZ TOUCH RECOVERY INSTALLER   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing PhilZ Touch Recovery, which might delete internal sd card too, your files will remain safe on PC.

Prepare your phone:

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” check-box (under Debugging section).

On your HTC One S, go to Settings » select Battery and in the Battery menu make sure Fast boot is unchecked. Un-check it if it is enabled. Skip this step if there is no Fast boot option under Settings » Battery.

api (folder)

adb.exe

AdbWinApi.dll

AdbWinUsbApi.dll

fastboot.exe

recovery.img

source.properties

Your device will automatically boot into system. To boot into your newly flashed PhilZ Touch Recovery:

Power off your HTC One S and wait for 6-7 seconds after display is off.

Press and hold these 2 buttons together: Power + Volume Down.

Press the Volume Down button to highlight the RECOVERY option and press Power button to select it.

SCREENSHOTS

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Android 5.1 Update For Verizon Galaxy Note 2 Arrives Unofficially Already

There are only slim chances that Verizon Galaxy Note 2 will ever see an official Android 5.1 OTA update from Samsung, more so because the device is already more than 2 years old now, an update criteria that most OEMs follow, and also because Samsung is known to be lethargic with updates. So, there is lot to cheer for when an unofficial update makes a way towards your Galaxy Note 2.

Based on Android 5.1, the Cyanogenmod 12.1 custom ROM blesses your Samsung Galaxy Note 2 at Verizon with pure stock UI, and some of the coolest customization options around, without overdoing it. After all, it’s still the most popular of ROMs. ROM’s Developer has even mixed some beautiful features from other popular ROMs like Slim, Nameless, etc. and has brought the Sabermod into the mix too. Incredible work! And when official update is a no, you can’t ask for more than this.

Being in early stage of development, the CM12.1 ROM isn’t all smooth and not void of several force close errors at some points either, but that’s not to say you’ll struggle a lot. It’s good and most of the basic functions work all fine. Calls, data, wi-fi, bluetooth, etc. are properly working, while in due course, most of the bugs will be ironed out too.

And in any case, if you want to go back to official Samsung KitKat firmware for your Verizon Note 2, you can do so pretty easily — a simple firmware flash using Odin software is all it takes to remove custom ROM, custom recovery and root, all in one shot, and restoring the phone back to stock, Samsung firmware.

Note: As you already know, it’s not an official Samsung Android 5.1 update for Verizon Note 2, so expect few kinks at some corners of the ROM that are yet to be fixed by the team. Any major bugs will be reported below.

Bugs

None (Be sure to flash RIL patch after installing ROM to get network working properly!)

Download the ROM file in .zip format from the source development page here, where you could also keep a tab on updates for the ROM, and any current issues with the ROM with fixes, if any, available. Also download the RIL patch file given there besides the ROM, and the Gapps file from the same page.

Supported devices

Samsung Galaxy Note 2 at Verizon, model no. SCH-i605

Don’t try on any other Note series set or other device of Samsung or any other company

Instructions

Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Important Note: Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

Transfer the ROM file package file to your device’s internal storage and remember the location where you save it.

You need TWRP recovery for this. Get it from here. There’s good instructions set there, too. For more help, Google is your friend.

Boot into Recovery mode.

Once in TWRP recovery, take a backup of your current ROM. Select Backup, then do a “Swipe to Back Up” on the bottom of the screen.

Once the backup is finished, select Wipe, then do a “Swipe to Factory Reset” on the bottom of the screen.

Go back to the main menu of TWRP recovery and select Install.

Navigate to the file where you saved your ROM’s zip file, select it and “Swipe to Confirm Flash” on the bottom of the screen. Now wait until the flashing process finishes.

Similarly, flash the RIL patch file.

Also flash the Gapps file the same way.

Go to back to recovery’s Main menu, select Reboot » select System.

Your device will now reboot with Android 5.1 update, thanks to CM12.1 custom ROM.

In case you need any help over this, let us know. And, you can thank the developer  for this.

Android 5.1 update is also available on:

Sprint Galaxy Note 3 Gets Android 4.4.2 Kitkat Update Via Cm11 Rom

Known Bugs/Issues

[As of January 04, 2014]

Bluetooth Calling.

Audio over Speaker Phone.

Audio over Google Hangouts.

 WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900P!

Please know that this page is meant only for Sprint Samsung Galaxy Note 3 international model no. SM-N900P. Please DO NOT try the procedures given here on other variants of the Samsung Galaxy Note 3, including those at Verizon,T-mobile and AT&T and the international ones.

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

►ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY

 Skip this step if you you already have latest version of CWM or TWRP recovery installed on your device.

Make sure that you’ve latest version of the recovery installed on your device.

Older versions of CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.

For help on installing recovery on your Galaxy NOTE 3, check our exclusive page on TWRP recovery for Galaxy NOTE 3.

►GET TWRP RECOVERY FOR SPRINT GALAXY NOTE 3

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the file given below and transfer it to a separate folder on your phone and remember the location.

  ROM FILE

  GAPPS FILE

Be sure to transfer the ROM and Gapps files you downloaded above to your phone and remember the location of the files.

You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.

We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.

  GUIDE FOR FLASHING ROM IN CWM RECOVERY

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Perform a full clean-up of the device (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).

Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.

Now, format the system. Go to mounts and storage and select format/system, and then select Yes on next screen.

First Install the ROM file:

Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file.

└Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).

Also perform a System format. For this:

Tap on Wipe » tap Advanced Wipe » tap System to select it » then at the bottom of the screen do a Swipe on the ‘Swipe to wipe‘ option.

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

How To Unbrick Or Restore Samsung Galaxy Alpha Sm

Well, what we can do now is try to restore your Galaxy Alpha back to stock using a firmware so that all bad partitions on the device are fixed and it doesn’t bootloops and restarts normally.

And well, depending on what you were trying to do, and more importantly how, it could either be soft-bricked or hard-bricked — in latter case, as sad as it is, you maybe out of luck, man!

What’s Hard-brick and Soft-brick?

Even though rare, and when you are like set to be doomed, your Galaxy Alpha  might get hard-bricked. In which case, the Galaxy Alpha  won’t boot into download mode — it won’t respond to key combinations you are trying to make it to boot normally or to download or recovery mode.

Hard-brick results in one dead Android device. Yes, it’s sick, and worrying. You may have to look for a JTAG service locally; the person with good knowledge of that may be able to revive it. Oh, you can also try using USB Jig (look on ebay, perhaps!) to reboot the Galaxy Alpha into download mode, but it may or may not work!

Hard-brick is rare, it may happen only when power supply gets disturbed of computer and/or Android device when something is being installed/updated on the device. Or, when you totally mis-do things totally recklessly. That’s why you have to be very careful with even the easiest steps.

Let’s see soft-brick now. Normally, a rick is a soft-brick, which means your device isn’t completely dead, that it is just not able to boot normally and gets stuck somewhere. And, download mode is working.

How to identify bricked Galaxy Alpha SM-G850F?

If your Android device can boot into download mode, then it means it’s a soft-brick. If it cannot, then it’s hard-bricked.

Cases of soft-brick:

Bootloop: Your Galaxy Alpha is not restarting properly and gets stuck at logo, and reboots again and again on it. Mostly occurs when you flash something bad.

Corrupted but working: Your Galaxy Alpha can’t power On, but is entering the Download mode and/or Recovery mode on pressing the key combinations. That is, it’s responding to key combos, at the least.

Any other case: As it doesn’t matter what happened, as long as you can access Download mode using the key combos specified in the unbrick Galaxy Alpha guide below, you’re good — no reasons to worry!

Solution?

Just install the firmware using the guide below and your Galaxy Alpha shall be up and running coolly soon enough! you must be able to enter download using the key combinations specified in the guide below. Cases of Hard-brick:

Well, if you can’t enter download mode using the key combinations specified in the guide below, you got a worry — your device is hard-bricked. You can’t repair it yourself unless you are able to reboot it into download mode.

Solution?

You can try USB Jig to enter Download mode but there is no guarantee it would work. Your last hope is JTAG: find a local service provider who can us the JTAG for you and revive your dead hard bricked Galaxy Alpha. You can use Google to buy JTAG and try it yourself but we don’t recommend it at all, as it requires the skills of a knowledgeable person in Electronics.

Let’s see now how to unbrick or restore or fix a bricked Galaxy Alpha SM-G850F.

How to Restore Samsung Galaxy Alpha SM-G850F to Unbrick and Fix it

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  SAMSUNG GALAXY ALPHA SM-G850F OFFICIAL KITKAT 4.4.4 FIRMWARE

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-G850F!

Do not use the procedures discussed here on any other Galaxy Alpha (including the Galaxy Alpha variant at T-Mobile, Sprint, US-Cellular, AT&T, Verizon and other International LTE variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Samsung Galaxy Alpha SM-G850F. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Alpha on your computer.

► SAMSUNG GALAXY ALPHA DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE   FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

  Example video: If you haven’t used Odin before to install a stock firmware or anything else, then we suggest you first watch a video of that to get familiar with the process.

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip the Firmware zip file, G850FXXU2ANHD_G850FBTU2ANH7_BTU.zip on your computer (using 7-zip free software, preferably) to get this file: G850FXXU2ANHD_G850FBTU2ANH7_G850FXXU1ANHD_HOME.tar.md5

Move the friwmare file, tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

G850FXXU2ANHD_G850FBTU2ANH7_G850FXXU1ANHD_HOME.tar.md5

Disconnect the Galaxy Alpha from PC if it is connected.

Boot your Samsung Galaxy Alpha into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

Press Volume Up now to continue to Download Mode

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Alpha as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 2) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Alpha from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Alpha from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Update the detailed information about Philz Touch Recovery For Verizon Galaxy Note 3 Sm on the Eastwest.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!