Trending February 2024 # Sprint Galaxy Note 3 Gets Android 4.4.2 Kitkat Update Via Cm11 Rom # Suggested March 2024 # Top 9 Popular

You are reading the article Sprint Galaxy Note 3 Gets Android 4.4.2 Kitkat Update Via Cm11 Rom updated in February 2024 on the website Eastwest.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Sprint Galaxy Note 3 Gets Android 4.4.2 Kitkat Update Via Cm11 Rom

Known Bugs/Issues

[As of January 04, 2014]

Bluetooth Calling.

Audio over Speaker Phone.

Audio over Google Hangouts.

 WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N900P!

Please know that this page is meant only for Sprint Samsung Galaxy Note 3 international model no. SM-N900P. Please DO NOT try the procedures given here on other variants of the Samsung Galaxy Note 3, including those at Verizon,T-mobile and AT&T and the international ones.

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

►ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY

 Skip this step if you you already have latest version of CWM or TWRP recovery installed on your device.

Make sure that you’ve latest version of the recovery installed on your device.

Older versions of CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.

For help on installing recovery on your Galaxy NOTE 3, check our exclusive page on TWRP recovery for Galaxy NOTE 3.

►GET TWRP RECOVERY FOR SPRINT GALAXY NOTE 3

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the file given below and transfer it to a separate folder on your phone and remember the location.

  ROM FILE

  GAPPS FILE

Be sure to transfer the ROM and Gapps files you downloaded above to your phone and remember the location of the files.

You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.

We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.

  GUIDE FOR FLASHING ROM IN CWM RECOVERY

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Perform a full clean-up of the device (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).

Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.

Now, format the system. Go to mounts and storage and select format/system, and then select Yes on next screen.

First Install the ROM file:

Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file.

└Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).

Also perform a System format. For this:

Tap on Wipe » tap Advanced Wipe » tap System to select it » then at the bottom of the screen do a Swipe on the ‘Swipe to wipe‘ option.

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

You're reading Sprint Galaxy Note 3 Gets Android 4.4.2 Kitkat Update Via Cm11 Rom

Get Transformer Pad Tf701 Android 4.4 Kitkat Update Via Cm11 Rom

Known Bugs/Issues

[As of January 23, 2014]

Chrome/Firefox will not render correctly. (Shows only black/white tabs)

 WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be TF701T/K00C!

Please know that this page is meant only for Asus Transformer pad with model no. TF701T . Please DO NOT try the procedures given here on any other device of Asus or any other company. You have been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

 STEP 2: UNLOCK BOOTLOADER

 Skip this step if your device is already bootloader unlocked.

User must first unlock the bootloader on your Asus Transformer Pad TF701T before proceeding with the guide below.

So, if you haven’t unlocked bootloader of your Asus Transformer TF701T before, do it now. And if you had re-locked it after doing your part of hacks and all, it’s time to unlock it again.

 Note: You must be on 10.26.1.18 bootloader (updating to ASUS’s latest 4.3 release will install this)

  STEP 3: INSTALL THE LATEST CWM/TWRP RECOVERY

 Skip this step if you already have latest version of CWM or TWRP recovery installed on your device.

Make sure that you’ve latest version of the recovery installed on your device.

Older versions of CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.

   STEP 4: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the file given below and transfer it to a separate folder on your phone and remember the location.

  ROM FILE

For latest version of the ROM files, check the original page →

  GAPPS FILE

For latest version of the Gapps files, check the original page →

Be sure to transfer the ROM and Gapps files you downloaded above to your phone and remember the location of the files.

You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.

We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.

  GUIDE FOR FLASHING ROM IN CWM RECOVERY

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait 4-5 seconds after lights go off.

Press and hold Volume Down + Power key together. You will be in Bootloader mode now.

└ In recovery, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Perform a full clean-up of the device (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).

Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.

First Install the ROM file:

Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file.

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait 4-5 seconds after lights go off.

Press and hold Volume Down + Power key together. You will be in Bootloader mode now.

Press Volume Up/Down buttons a few times to select Recovery option, and then press Power key to reboot into recovery mode.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

SCREENSHOTS

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Install Samsung Galaxy Note 10.1 Lte Android 4.4.2 Kitkat Update: P605Xxucne2

Last week, Samsung started rolling out the KitKat update for Galaxy Note 10.1 starting with Germany with the N8000XXUDNE4 firmware. Now the Android 4.4.2 KitKat update for the Galaxy Note 10.1 LTE SM-P605 have begun rolling out.

The Galaxy Note 10.1 LTE KitKat update will include performance improvements and other basic KitKat goodies like white status bar icons, camera app lockscreen shortcut and more.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  SAMSUNG GALAXY NOTE 10.1 LTE SM-P605 OFFICIAL ANDROID 4.4.2 KITKAT FIRMWARE: P605XXUCNE2

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-P605!

Do NOT use the procedures discussed here on any Galaxy model (including the Galaxy NOTE tablets) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Galaxy NOTE 10.1. In case you’re not sure, follow the link below for a definitive guide for installing driver for your NOTE 10.1 on your computer.

► SAMSUNG GALAXY NOTE 10.1 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

Download the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.

  ODIN ZIP FILE   FIRMWARE ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might format internal sd card too, your files will remain safe on PC.

Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe

Extract/Unzip the Firmware zip file, chúng tôi on your computer (using 7-zip free software, preferably) to get this file: P605XXUCNE2 _P605OXACNE2_P605XXUCNE2.tar.md5

Move the extracted file, P605XXUCNE2 _P605OXACNE2_P605XXUCNE2.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:

Odin3 v3.09.exe

P605XXUCNE2 _P605OXACNE2_P605XXUCNE2.tar.md5

Disconnect the Galaxy NOTE 10.1 LTE from PC if it is connected.

Boot your Galaxy NOTE 10.1  into Download Mode (the image below of S2 would help you):

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 2 buttons together until you see Warning! screen: Volume Down + Power

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy NOTE 10.1  as said above.

If you have already installed driver, then uninstall them and re-install back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot phone and PC and then try again.

Load the firmware file (extracted in Step 2) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy NOTE 10.1  from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your NOTE 10.1  from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Update Verizon Samsung Galaxy S3 To Android 4.4.2 Kitkat With Official Aokp Rom

Known Bugs/Issues

[As of January 08, 2014]

No bugs reported yet.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SCH-I535!

Please know that this page is meant only for Verizon Samsung Galaxy S3. Please DO NOT try the procedures given here on other variants of the Galaxy S3 (including the S3 devices at At&T, US Cellular, T-Mobile and International Ones) or on any other device of Samsung or any other company. You have been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY

 Skip this step if you already have latest version of CWM or TWRP recovery installed on your device.

Make sure that you’ve latest version of the recovery installed on your device.

Older versions of CWM and TWRP recoveries are not working with Android 4.4 based ROMs, throwing installation errors and WiFi bugs, therefore you need to use the latest version of either recovery.

For help on installing recovery on your Verizon Galaxy S3, check our exclusive pages on TWRP and CWM recoveries for Verizon Galaxy S3.

► GET TWRP RECOVERY FOR VERIZON GALAXY S3

► GET CWM RECOVERY FOR VERIZON GALAXY S3

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the file given below and transfer it to a separate folder on your phone and remember the location.

  ROM FILE

For latest version of the ROM, check the original page →

  GAPPS FILE

Be sure to transfer the ROM and Gapps files you downloaded above to your phone and remember the location of the files. You will need to flash them now on your device using either of ClockworkMod (CWM) or TWRP recovery.

We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.

  GUIDE FOR FLASHING ROM IN CWM RECOVERY

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

└ In Recovery mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.

Perform a full clean-up of the device (This will delete all apps and their settings and game progress). For this:

Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).

Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.

First Install the ROM file:

Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the ROM file.

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. For this, go back to the main menu of recovery and select reboot system now.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

GUIDE FOR TWRP RECOVERY USERS

Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Press and hold  Volume Up + Home + Power buttons together and release them as soon as you see the Galaxy S3 logo.

Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.

Perform a Factory Reset (this will delete all apps and their settings and game progress). For this:

Tap on Wipe » then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option (screenshot).

First Install the ROM file:

└ Make sure to first flash the ROM file and then the Gapps file.

Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.

That’s all. Your phone will now reboot and it will take some time as it’ll be phone’s first boot after installing Android 4.4, be extremely excited for this!

 Note: In case your device gets bootloop (stuck at logo while rebooting), just do a factory reset (step 3) and you will be fine.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Root Sprint Samsung Galaxy Note 2 Sph

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  GUIDE: ROOT SPRINT SAMSUNG GALAXY NOTE 2 SPH-L900

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Do not use the procedures discussed here on any other variants of Galaxy Note 2 (including the Galaxy Note 2 variant at AT&T, LTE, Verizon, T-Mobile, US Cellular and other International variants) or any other device of Samsung or any other company. You have been warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully root your Sprint Samsung Galaxy Note 2.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

  CF AUTO ROOT FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the CF Auto Root, which might delete internal sd card too, your files will remain safe on PC.

Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-t0ltespr-t0ltespr-sphl900.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:

Odin3-v1.85.exe

Odin3.ini

CF-Auto-Root-t0ltespr-t0ltespr-sphl900.tar.md5

Disconnect the Sprint Galaxy Note 2 from PC if it is connected.

Boot your Sprint Samsung Galaxy Note 2 into Download Mode:

Power off your phone first and wait for 6-7 seconds after display is off

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Sprint Galaxy Note 2 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

Load the firmware file (extracted in Step 1) into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps. (Step 6 and Step 7)

When you get PASS! message, your device will restart automatically. You can then disconnect your phone from PC.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Sprint Galaxy Note 2 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Sprint Galaxy Note 2 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:

Pull out the battery and re-insert it.

Boot your Sprint Galaxy Note 2 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.

Now, this will start the rooting process and will reboot the phone automatically when the process is done.

FEEDBACK US!

It was easy to root your Sprint Galaxy Note 2 with CF Auto Root Tool, right?  Let us know how you plan to use root privileges on your Sprint Galaxy Note 2.

Your suggestions and queries, if any, are most welcomed!

Sprint Galaxy Note 4 Twrp Recovery (Sm

TWRP recovery is a custom recovery by the folks over at chúng tôi With a custom recovery you can do numerous things on your Galaxy Note 4 like flashing a custom ROM or installing MODs/tweaks to alter behavior of certain things on the stock firmware of your Galaxy Note 4.

A custom recovery like TWRP is a very powerful tool for managing the system on your phone. You could factory reset your Note 4 from TWRP recovery or clean system cache, even wipe the entire system partition on your device. So be verycautious when you’re using a custom recovery, because if used without care you may lose important data on your device.

With TWRP recovery available for Galaxy Note 4, there will be a rapid influx of custom ROMs and MODs/tweaks for your device very soon over at the XDA forums. We’ll be sure to cover the best of them as and when they appear.

Grab the TWRP recovery image in .tar package from the download links below and flash the recovery on your Note 4 using Odin. If you’re new to Android or you’ve never done stuff like this, then we’ve a complete step-by-step installation guide for you to flash the TWRP recovery on your Note 4.

  WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

  SPRINT GALAXY NOTE 4 TWRP RECOVERY INSTALLATION GUIDE

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

  STEP 0: CHECK DEVICE MODEL NO.

Please know that this page is meant only for Sprint Galaxy Note 4. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!

  STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

  STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully flash recovery on your Sprint Galaxy Note 4.

In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

► SAMSUNG GALAXY NOTE 4 DRIVERS INSTALLATION GUIDE

   STEP 3: INSTALLATION INSTRUCTIONS

  DOWNLOADS

Download the files given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

  TWRP RECOVERY TAR FILE   ODIN ZIP FILE   STEP-BY-STEP GUIDE

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the TWRP Recovery, which might delete internal sd card too, your files will remain safe on PC.

Extract

/Unzip the Odin

zip file

, Latest Odin_3.10.0.zip on your computer (using 7-zip free software, preferably) to get the following files:

Odin3 v3.10.0.exe

Odin3.ini

Odin3 v3.10.0.exe

Odin3.ini

openrecovery-twrp-xx.xx-trltespr.img.tar

Disconnect the Galaxy Note 4 from PC if it is connected.

Boot your Galaxy Note 4 into Download Mode:

Power off your phone first. Wait for 6-7 seconds after display is off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

If you don’t get the Added! message, here are some troubleshooting tips:

Make sure you have installed driver for Galaxy Note 4 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

Load the recovery file in .tar form into Odin as instructed below:

Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps. (Step 7 and Step 8)

When you get PASS! message, your device will restart automatically. You can then disconnect your phone from PC.

If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.

NOTE: It may happen that your phone doesn’t automatically boot into recovery. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:

Pull out the battery and re-insert it.

Boot your Galaxy Note 4 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.

FEEDBACK US!

Your suggestions and queries, if any, are most welcomed!

Update the detailed information about Sprint Galaxy Note 3 Gets Android 4.4.2 Kitkat Update Via Cm11 Rom on the Eastwest.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!