Trending February 2024 # Wifi Working But Ethernet Not Working In Windows 11/10 # Suggested March 2024 # Top 5 Popular

You are reading the article Wifi Working But Ethernet Not Working In Windows 11/10 updated in February 2024 on the website Eastwest.edu.vn. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Wifi Working But Ethernet Not Working In Windows 11/10

Internet not working is a common issue with Windows computers but imagine a situation in which the Ethernet is not working on your system even though the WiFi is working well. If you face this issue, here are some suggestions to help you troubleshoot and fix the issue.

WiFi working but Ethernet not working on Windows PC

The causes could be with the internet cable itself or the settings of the system. In either case, you would have to troubleshoot the problem. Try the following solutions:

Use a different ethernet cable

Run the Network Adapter troubleshooter

Temporarily turn OFF anti-virus and Firewall

Make sure that the ethernet adapter is enabled

Release IP address

Update the network drivers

1] Use a different ethernet cable

To isolate the cause with the ethernet cable, you can try using a different ethernet cable. If it works, the earlier cable could be faulty. In case you don’t have an extra ethernet cable, use the current one with a different computer.

Another fact to be noted is that the ethernet slot on the router could be faulty too. But usually, routers come with multiple ethernet slots. So, you can try changing the slot as well.

2] Run the Network Adapter troubleshooter

The Network Adapter troubleshooter checks for problems with the Network Adapter and resolves them if possible. The procedure to run the Network Adapter troubleshooter is as follows:

Go to the System tab on the list on the left-hand side.

3] Temporarily turn OFF anti-virus and Firewall

Search for Windows Security in the Windows Search bar.

Open the application.

Turn the switch OFF for Real-time protection.

Check if this resolves the issue.

Turn the switch ON later when the problem is resolved.

You can temporarily turn OFF the Windows Defender Firewall too.

4] Make sure that the Ethernet adapter is enabled

If the ethernet adapter is disabled, the ethernet connection will cease working even if the Wi-Fi works well. The procedure to affirm this is as follows:

Press Win+R to open the Run window.

In the Run window, type the command chúng tôi and hit Enter to open the Network Connections window.

In the Network Connections window, check if you notice Disabled on the ethernet adapter.

5] Release IP address

Since the issue could also be with the IP address of the system, you can fix it as follows:

Search for Command Prompt in the Windows Search bar.

In the Command Prompt window, type or copy-paste the following commands and hit Enter after each of them to change the IP address.

ipconfig /release ipconfig /renew

Then reboot your system and check if this fixes the problem.

6] Update the Network drivers

Windows Update is probably the most efficient way to update network drivers in Windows 11. Whether it is a Wi-Fi driver or Ethernet driver, you can use the Windows Update to download and install the pending updates. The best thing is that you can download such updates manually. To update Network drivers in Windows 11 using Windows Updates, follow these steps:

Press Win+I to open Windows Settings.

Go to the Windows Update tab on the left side.

Expand the Drivers updates section.

It will start downloading and installing the update automatically.

You can also use the Device Manager to update Network drivers:

Press Win+R to open the Run window.

In the Run window, type the command chúng tôi and hit Enter. This will open the Device Manager window.

Expand the list for Network Adapters.

Read: Where to download Ethernet Drivers for Windows?

Why is WIFI working but not Ethernet?

If WiFi is working but not the Ethernet, you must check the network adapter first. If you use an external Ethernet adapter, it is required to verify if it is working or not. Also, you must download and install the Ethernet adapter’s driver. In case you have already installed, you can reinstall the driver.

Fix: Network & Internet connection problems in Windows

How do I enable Ethernet on Windows 11?

Related: Ethernet works but not WiFi in Windows

You're reading Wifi Working But Ethernet Not Working In Windows 11/10

Keyboard Or Mouse Not Working In Windows 11/10

If your Keyboard or Mouse is not working in Windows 11/10 maybe after a BIOS update, PC Reset, Boot or Windows Update or Upgrade, here are a few things you could try to fix the issue. Sometimes simply restarting the computer or disconnecting and reconnecting the mouse or keyboard can help; if it does not then this post offers some troubleshooting suggestions that may help you.

Keyboard or Mouse not working in Windows 11/10

If you have a touchscreen monitor or laptop, you can keep using your Windows PC without a mouse or keyboard, and it also makes troubleshooting easier. If you do not have a touchscreen monitor or Windows PC, and your mouse and your keyboard have stopped working, it makes things a bit difficult. You may need to use the on-screen keyboard. Also, read our post on how to use a Windows computer without a keyboard or mouse.

Read: How to log into a Windows computer without Keyboard.

If your Keyboard or Mouse not working in Windows 11/10, first check if you need to change the battery; and then try these suggestions:

Use the keyboard/mouse with a different computer

Check the Bluetooth/Wi-Fi connection

Check the cable of cabled keyboard and mouse

Perform Clean Boot

Check the Device Driver

Run the Keyboard Troubleshooter

Disable Hybrid shutdown

Check Bluetooth keyboard settings

Check USB Hub

Disable Filter Keys

Mouse Pointer lags.

Let us see this in detail.

1] Use the keyboard/mouse with a different computer

Use the keyboard or mouse with another computer. This way you will confirm whether the problem lies your keyboard and mouse or the PC. You may also connect another keyboard or mouse to your computer and see if that works.

Related: Bluetooth mouse is connected but does not work.

2] Check the Bluetooth/Wi-Fi connection

Check if your connections are working fine. Many times, the Bluetooth receiver of your keyboard and mouse stops working. It that happens, you won’t be able to use the peripherals with your PC.

3] Check the cable of the keyboard and mouse

If you are using a cabled keyboard or mouse, you need to check the wire correctly. You should also connect the cabled mouse/keyboard to another PC so as to identify if the fault lies with the keyboard/mouse or the PC. If you do not have another computer nearby and you have an OTG cable, you can also check using your smartphone. But, you may not be able to test old PS2 models with OTG cable.

Read: Computer not recognizing Monitor, Keyboard or Mouse.

Clean Boot is probably the easiest way to fix various driver or software-related issues. Start in Clean Boot State and check if they are working or not – and then troubleshoot manually by trial and error method.

Read: Keyboard & mouse stop working when a USB Flash Drive is connected.

5] Check the Device Driver

If either the mouse or keyboard is not working, you may update your drivers and see if it helps. Although Bluetooth or Wi-Fi mouse and keyboard do not require any software to be installed in Windows 10, if you are using older models, they may need some 3rd–party software or driver to be installed. You can use the Device Manager for this purpose.

Read: USB Keyboard not recognized.

6] Run the Keyboard Troubleshooter

Open the Troubleshoot page in Windows Settings and run the Keyboard Troubleshooter.

Read: Keyboard typing multiple letters at once in Windows

7] Disable Hybrid shutdown

See if disabling Fast Startup helps – as some have reported that this helped.

If this does not help, remember to reverse the changes.

8] Check Bluetooth keyboard settings 9] Check USB Hub

If you are using a USB Hub to connect all your external devices, you should check whether it is working correctly or not. Try plugging in another USB device or use the mouse or keyboard directly with your computer.

Read: Keyboard typing wrong letters.

10] Disable Filter Keys

11] Mouse Pointer lags

This post will help you if your Mouse Pointer lags or freezes while working or playing games.

See this post if the Logitech keyboard is not working.

Laptop Touchpad not working

See these posts if:

Is there a keyboard lock button?

Most computers have a keyboard lock feature that allows you to lock the keyboard to prevent unintended keystrokes or to prevent access to the computer. The keyboard lock is typically enabled by pressing a combination of keys or a dedicated keyboard lock button if one is available. For example, on many laptops, the keyboard lock can be enabled by pressing the “Fn” key along with the “F1” or “F2” key. The keyboard lock may be enabled on desktop computers by pressing the “Scroll Lock” or “Num Lock” key.

How do I reset my keyboard?

While you can choose to uninstall the keyboard from the device manager and then detect it again, a better way to reset the keyboard is to unplug it from the PC by taking out the USB end.  Once done, wait a while so any power glitch from the keyboard is gone. Plug it back in, and press the num lock to check if the keyboard has started working.

Windows Key Or Winkey Not Working On Windows 11/10

Windows Key or the WinKey is one of the core keys in Windows which lets you do multiple tasks. Right from launching Start Menu to Win+Tab, Win+R, Win+S, and many others. Many a time this causes a problem, and you cannot use it as you want it to. This nuisance becomes even worse when you are in a remote desktop solution, and it feels like Windows Key or the WinKey is disabled.

Windows key or WinKey not working

In this guide, we look at various solutions to fix the issue where the Windows key or WinKey is not working on Windows 11/10 – maybe in a game. Try the following solutions to resolve the issue.

Restart Windows Explorer

Disable Game Mode on your keyboard

Check if WinKey is disabled

Use PowerShell to enable WinKey

Force Windows to rescan the keyboard

Look for the WinKey Lock Button on your Keyboard

Check if the issue is associated with your keyboard driver

Turn off Filter Keys

Troubleshoot in a Clean Boot State

Create a new user account

Let’s see all these fixes in detail.

1] Restart Windows Explorer

The first thing that you should try is to restart Windows Explorer. The following steps will guide you on how to restart Windows Explorer on Windows 11/10.

Open the Task Manager.

Select the Processes tab.

Scroll down and locate Windows Explorer.

Now, check if the issue is fixed.

One of the most common scenarios is the Game Mode of Windows. By design, it makes sure that Windows Key is disabled. This makes sure that if you accidentally hit the Windows Key, the Start Menu doesn’t take over the focus, and your gaming experience is ruined. That said, it only works with keyboards that support game mode on a hardware level. Logitech G810 Gaming keyboard offers this.

You will have to use the keyboard software from the OEM to disable the Windows key or WinKey when not gaming.

3] WinKey disabled?

Check if your WinKey has been disabled.

4] Use Powershell to enable Windows Key

Launch Powershell with admin privileges. Copy-paste the below-mentioned command and hit return. Once it executes successfully, you will be able to use the Windows Key as usual.

Make sure to create a restore point before executing this so in case something goes wrong; you can get back to the previous state. The chances for something like this to happen are low.

5] Force Windows to Rescan the Keyboard

Windows understands input from the hardware by keeping a digital map called ScanMap. Every key is mapped into the computer’s memory. The same goes for Windows Key as well. In case Windows is not able to understand, we can force it. This calls in for registry editing, so make sure to take a backup or create a restore point, and then perform this step.

Type REGEDIT on the start menu, and launch it with admin privileges.

Then navigate to:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlKeyboard Layout

Restart your PC, and it will force it to scan, and then create a new key for it.

6] Look for the WinKey Lock Button on your Keyboard

Many special keyboards come with Win Lock Button. If your keyboard is different from others, check for a hardware button that can disable the Windows key or WinKey. Disable it.

If nothing works, you can always create a new account to see if it’s working on that account or run an SFC scan.

7] Keyboard Driver issue

It may so happen that one of the latest updates of the driver for the keyboard may have caused the issue. You might want to roll back the keyboard driver to see if it fixes it for you.

Find your keyboard under the keyboard section.

See if you can roll back the driver. If this option is disabled, you can uninstall the driver, and let Windows configure it again.

You can also choose to download the latest driver from the OEM website and update it accordingly. This should fix any misconfiguration with the keyboard.

8] Turn off Filter Keys

Filter Keys is a feature that you can turn on to ignore repeated keystrokes. In some cases, Filter Keys also affect the Windows key. Disable Filter Keys if you have enabled it and see if this brings any changes.

9] Troubleshoot in Clean Boot State

Clean Boot is a state of Windows that runs the PC with minimally required drivers, and applications. Once in Clean Boot,  follow the steps below:

Type msconfig in the Run prompt. This will open the System Configuration window.

Under the Services tab, check the box which says Hide all Microsoft Services.

Now disable the remaining services one by one, and restart your PC to see if it resolves the issue.

10] Create a new user account

If none of the above solutions worked for you, your user profile might be corrupted. To check this, create a new user account and then log into that account. Now, check if the Windows key works in the new user account. If this resolves your issue, you can keep using the new user account and delete the old one (if you want).

It’s a cumbersome process and will take time, but probably the last on the list if nothing works for you.

How do I fix my Windows key is not working?

If your Windows key is not working, first, check if the Win key is disabled. If you find it disabled, enabling it again will fix the issue. Other fixes that you can try are restarting Windows Explorer, disabling the Game Mode, troubleshooting in a Clean Boot State, etc. We have explained all possible fixes to fix the Windows key or WinKey not working issue on Windows 11/10 in this article.

How do I know if my Windows key is working?

Press the Windows logo key on your keyboard and the Start menu will appear on your screen. Apart from that, you can also try some other keyboard shortcuts, like Win + R opens the Run command box. Moreover, you can also use free keyboard tester software for the same. These methods will let you know if your Windows key is working or not.

If you are talking about the Windows license key, you can check if it is genuine or legit by using the PID Checker tools or via the Software Licensing User Interface.

I am hoping one of these suggestions will help fix the Windows key or WinKey not working issue on Windows 11/10.

Windows 10/11 File Explorer Dark Theme Not Working

Windows 10/11 File Explorer dark theme not working [Fixed]

238

Share

X

Plenty of users complain about the same issue: the Windows 10 File Explorer dark theme isn’t working for them.

If that’s your case too, restart File Explorer or use one of the other tips mentioned below.

It’s also a good idea to check if you have the latest updates installed on your PC.

Using a line-command tool to start some useful scanning apps can also help a lot.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix various Windows 10 errors, we recommend Fortect:

This software will repair common computer errors, protect you from file loss, malware damage, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove virus damage now in 3 easy steps:

Download and Install Fortect on your PC

Launch the tool and Start scanning to find broken files that are causing the problems

Fortect has been downloaded by

0

readers this month.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Using a dark theme on your PC can be useful, but many users reported that the dark theme in File Explorer isn’t working for them on Windows 10.

This can be a problem, and in today’s article, we’ll show you how to fix this issue.

Dark theme is a welcome addition to Windows, but some users reported issues with the dark theme and File Explorer. Here’s how you can easily solve them.

If your system is up to date, and you’re running the latest Windows 10 build, be sure to try all other solutions from this article.

They may be applied to any of these common problems that users often face:

Windows 10 dark mode File Explorer is not working – This issue can occur due to certain glitches on your system. In most cases, you can fix the problem by restarting Windows Explorer.

Windows Explorer dark theme is not working – This problem may appear if you’re using a custom visual theme in Windows. To fix it, be sure to revert to the default theme and check if that helps.

File Explorer dark theme is not working 1803 – Many users reported that the dark theme isn’t working on build 1803. In case you don’t know, this feature is available starting from build 1809, so be sure to update your system.

Dark theme not applying to File Explorer is not enabling in File Explorer – There are many causes for this error, but if you’re having problems with File Explorer and dark theme, you should be able to solve them by using one of our solutions.

Quick tip:

If Windows 10’s native dark theme doesn’t work in the File Explorer for whatever reason, then maybe it’s time to use a third-party tool to get the job done.

When it comes to customizing your PC, few software tools com close to what Stardock’s Object Desktop can do, as it allows a complete visual transformation of your PC.

Object Desktop

If you want to apply a dark theme to Windows 10, but the native one doesn’t work, give Object Desktop a try!

Check priceVisit website

What can I do if the File Explorer dark theme is not working?

1. Make sure that you have the latest updates installed

1.1 Check the version

If the dark theme isn’t available for File Explorer on your PC, the issue is most likely related to a missing update.

The dark theme in File Explorer is a new feature, and so far it’s available only in Windows 10 October update or later.

If you don’t have a newer build installed, then you won’t be able to use the dark theme on your PC. To see if you have the latest build installed, you just need to follow the above steps.

1.2 Check for updates

Windows will now check for available updates and try to download them in the background.

Bear in mind that this method doesn’t always work, and if that’s the case, you’ll need to use the Media Creation Tool and Windows 10 ISO.

We wrote a detailed guide on how to install Windows 10 October Update from an ISO file, so be sure to check it out for step-by-step instructions.

Once your PC is up to date and you have the latest build installed, the problem should be fixed, and you’ll be able to use the dark theme without any issues.

Which is the latest version of Windows 10? Find out from our constantly updated article!

2. Switch to the default theme

After doing that, you’ll switch back to the default theme, and the dark theme should start working in File Explorer.

Windows 10 supports a wide range of customization, and it allows you to switch between many different themes.

Usually these themes come with their own color palette, and while these themes allow you to customize your Windows experience, they can also sometimes cause issues to appear.

Apparently, the dark theme for File Explorer isn’t available unless you’re using the default theme.

Expert tip:

3. Restart File Explorer

After a couple of moments, Windows Explorer should restart and you should be able to switch to the dark theme in File Explorer.

If the dark theme isn’t working on your PC, perhaps the issue is related to File Explorer. Sometimes there might be certain glitches with your system.

However, you can fix that issue simply by restarting File Explorer. To do that, just follow the above steps.

4. Log out and log back in

As we previously mentioned, sometimes glitches with Windows can cause issues with a dark theme to appear.

According to users, if you’re not able to use the dark File Explorer theme on your PC, you can try logging out of your account and logging back in.

Sometimes this can help you with certain glitches, and you can log out by completing the above procedure. After doing that, you should be able to use the dark theme on your PC.

5. Create a new user account

If you’re still unable to use a dark theme in File Explorer, it’s possible that your user account is corrupted.

This can happen for various reasons, but you can fix this problem simply by creating a new user account.

Since there isn’t a straightforward way to fix a corrupted user account, your best option would be to create a new user account. This is quite simple to do, as you can see above.

After doing that, you should have a new account ready to go. To check if the problem is resolved, switch to the new account and try activating the dark theme.

If the dark theme works on the new account, you should perhaps move all your personal files to it and start using it instead of your old account.

Do you want to learn how to manage User Account Control like a pro? This guide will help you!

6. Run SFC and DISM scans

6.1 Run the SFC scan

The procedure is quite simple, and you can do it by following the previous steps, After the SFC scan is finished, check if the problem is still there.

If you couldn’t run an SFC scan or if the scan didn’t fix the problem, you need to perform a DISM scan by doing the steps in the next solution.

6.2 Run the DISM scan

After the scan is completed, check if the problem is still there. If you couldn’t run an SFC scan before for some reason, try running it after the DISM scan and check if that helps.

If you need more info on DISM and how to use it, check out our detailed guide to master it like a professional.

Dark theme for File Explorer is a great addition to Windows 10, but if the dark theme isn’t working for you, the issue is most likely related to the missing updates.

One of our readers also suggested uninstalling chúng tôi or any other night filter that could interfere with the File Explorer’s Dark Theme so make sure to check that too.

Was this page helpful?

x

Keyboard Or Mouse Not Working After Windows 11/10 Update

Are you having issues with your keyboard or mouse after installing the latest Windows update on your computer? This is a common problem, especially for gamers using high-end peripherals. In this post, we will discuss some solutions to fix the keyboard or mouse not working issue after a Windows update in Windows 10/11.

Before trying any of the solutions below, make sure your keyboard or mouse cables are securely connected to your computer. Unplug and reconnect your peripherals and restart your computer. If the problem persists, proceed to the following fixes. You may need a spare working keyboard or mouse to apply any of the solutions.

We recommend trying other solutions first before resorting to this fix. Uninstalling the last Windows update should only be a last resort when nothing else works. However, if the problem occurred immediately after a Windows update, it’s possible that the update caused the issue.

To uninstall the most recent updates, follow these steps:

Go to Settings from the Start menu.

Select Update & Security.

Uninstall the updates that were installed on the most recent date.

Restart your computer and check if the issue is resolved. If not, run Windows Update again to reinstall the updates you uninstalled.

If it’s a major Windows update where uninstalling updates using the above method is not possible, you can roll back your Windows 10/11 to an earlier build. For detailed instructions, read: How to Roll Back Windows 10 Update.

When you run Windows Update, Windows 10/11 will usually scan your hardware and install the latest driver that it thinks best matches your hardware from its driver repository automatically (usually without your consent). If your mouse or keyboard suddenly stops working right after an update, Windows Update may have incorrectly installed a driver that is not suitable for your current keyboard or mouse.

To update your drivers, go to your keyboard or mouse manufacturer’s website and download the latest drivers for your keyboard or mouse. This is especially important for high-end gaming keyboards, mice, and other peripherals such as those from Razer, Steelseries, Logitech, and Corsair. After manually installing the driver provided by your manufacturer, restart your computer and check if the issue is resolved.

Alternatively, you can try to update your mouse and keyboard in the Device Manager. Follow these steps:

Go to the Start menu and search for Device Manager.

Open Device Manager and expand the Keyboards category.

Select your keyboard and then select Update driver.

For the mouse, expand Mice and other pointing devices.

Depending on what third-party software your keyboard or mouse relies on, you should check if the software can run correctly and is up-to-date enough to work with the latest Windows Update.

For example, if you are using any peripherals from Razer, you may want to check if there is an update to the Razer Synapse. Download and install the latest version software from your keyboard or mouse manufacturer’s website and check if it fixes the issue.

The troubleshooter in Windows 10/11 can sometimes help identify and fix issues. For the keyboard or mouse not working after a Windows update issue, you may want to try running the hardware and keyboard troubleshooter.

Follow these steps:

Go to the Start menu and open Settings.

Select Update & Security.

Select Troubleshoot from the left pane.

For the keyboard not working after the update problem, select Keyboard from the troubleshooter list.

For the mouse not working after the update problem, select Hardware and Devices.

Allow the troubleshooter to run itself. If it’s able to detect the cause of the issue, apply the fix as instructed accordingly.

If you have tried all of the solutions mentioned above and your keyboard or mouse still isn’t working after a Windows update, it’s possible that there may be a hardware issue.

One way to check if it’s a hardware issue is to try connecting your keyboard or mouse to another computer and see if it works. If it does work on another computer, then the issue may be with your current computer’s hardware or drivers.

However, if your keyboard or mouse doesn’t work on another computer, it’s likely that there is a hardware failure with your device. In this case, you may need to contact the manufacturer for support or consider replacing the device altogether.

Before you replace the device, it’s worth noting that there are some simple hardware checks you can perform to ensure that the issue isn’t with the hardware connections. For example, make sure that the USB port or connection that your keyboard or mouse is plugged into is functioning properly. You can also try using a different USB port to see if that resolves the issue.

Vpn Not Working In Windows 11/10 – Fix Vpn Problems & Issues

A VPN is used by many either to make sure they are not traceable throughout the internet or sometimes its work that needs them to connect to VPN to be on a secure network. Sometimes, network issues result in an error, and you are not able to connect. Either the website doesn’t load, or you are not able to log in to a network using VPN.

Just before we start, here are some basic troubleshooting tips you need to try to fix VPN issues on Windows 11/10. First, make sure your Windows 11/10 is updated to the latest version. Some updates fix known issues around VPN which helps instantly. Second, reinstall the network drivers to the latest version or try some old drivers to see if that fixes.  Lastly, the issue could be as simple as Cached DNS. Even though you had changed it, the computer uses an old address. So you may want to flush the DNS cache. You can also check if your router needs an update. The information will be available with the Web Interface of the router.

VPN not working in Windows 11/10 1] Change VPN Protocol

Open your VPN Settings and change the VPN Protocol. Setting it to OpenVPN has helped many get over this issue.

2] Reinstall VPN Software

If you are using a VPN software, instead of the inbuilt VPN feature of Windows 10, it is always a good idea to reinstall it. Many a time the configuration of the software is the root cause of the problem, and simple reinstallation fixes. Also, do cross-check if your VPN software subscription has expired.

3] Reinstall WAN MiniPorts

WAN Miniports are drivers for various types of network connections. WAN Miniport (IP), WAN Miniport(IPv6) and WAN Miniport (PPTP) are used for VPN connections, i.e., connection to a PPTP VPN server.  You can easily reinstall the drivers again using Windows.

Open Device Manager

Find Network Adapters

Uninstall WAN Miniport (IP), WAN Miniport(IPv6) and WAN Miniport (PPTP).

The adapters you just uninstalled should come back

Try connecting again. Hopefully, you should be good to go.

Related: Fix Can’t connect to VPN connection error on Windows

4] Troubleshoot TAP-Windows Adapter

These are virtual network kernel devices i.e. software-based, and offer virtual TAP device functionality on the Windows OS. Many a time this is required the VPN software to work properly. We would highly recommend you to check out our tutorial on TAP-Windows Adapters.

5 Insert an Exception for UDP by editing The Registry

UDP or User Datagram Protocol is another way of transmitting data, just like TCP. However, UDP is used primarily for establishing low-latency and loss-tolerating connections between applications on the internet. Many VPN software and even Windows uses it. If there is a security issue around it, it fails i.e. UDP needs to establish security associations when both the server and the Windows PC.

Follow these steps to access Registry Editor. You may need to create or update new input.

Backup your registry. In the search bar, type regedit and open the Registry Editor from the list of the results

Navigate to:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesPolicyAgent

Type AssumeUDPEncapsulationContextOnSendRule and then press ENTER.

In the Value Data box, type  2. A value of 2 configures Windows so that it can establish security associations when both the server and the Windows-based VPN client computer are behind NAT devices.

Reboot, and try again.

Read: Wireless Network not detected when using VPN

6] Configure Firewall

Windows Firewall makes sure that no unsecured or unauthorized connection gets access to your PC. Windows Firewall might disable or lock those requests from the VPN software, assuming it to be a threat. You need to allow the VPN through the Fiirewall.

In the Search bar, type Firewall and select ”Allow an app through Windows Firewall”.

In the huge list, look for your VPN software. Make sure to make sure that both the Public and Private networks are enabled.

If your software is not listed, you can find it manually using Allow another app.

Confirm changes and try connecting through your VPN again.

Read: VPN not hiding or changing Location

7] Disable IPv6

Many a time IPv6 may cause a problem connecting to the network. While the default is still set to IPv4, you can cross check by disabling IPv6 and run everything on IPv4. Every VPN creates a software-based network adapter. You just need to change adapter settings for this VPN to IPv4.

Open Network and Internet and then Network and Sharing Center.

Select Change adapter settings from the left pane.

Uncheck the box beside IPv6 and confirm changes.

Reboot your PC if you have to and try again.

Have a VPN Error Code for your issue?

If you have an error code for your VPN issue, we have a dedicated post, and possible solutions to fix them. Do check out our post on Common VPN error codes troubleshooting & solutions for Windows 11/10

I hope these tips help you.

Update the detailed information about Wifi Working But Ethernet Not Working In Windows 11/10 on the Eastwest.edu.vn website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!